[joka187]

i was wanting to know how hard a front wheel bearing is to change......and does it have to b pressed in......

 

[LostRacer]

It has to be pressed in. Most say its not hard to change..

 

[CougarGuy939]

ok im supposed to be doing mine tommorow so i'll let you know how it turns out, every time i turn to the right i get this humming sound and it vibrates a little

 

[joka187]

aight.....make sure to let me know b/c i think its going to be a pain......

 

[BIGTIME41]

It's not as hard as most think and yes it has to be pressed in....I changed both about 2 months ago....took me about 2-1/2 hours.

 

[MaverickFlyer]

Not hard at all it you have a 2 ton press! If not, good luck! I've done 4 on my car alone!

 

[99CouGSweetRide]

I just took the knuckles off and brought them to an auto parts place that pressed in new bearings. I think it cost $30 per side, that included the cost of the bearing. Make sure you have a nice long pipe when putting the knuckle back on.

Mike

 

[CougarGuy939]

I had them done but the mechanic didnt say that they were very hard to press in but i didnt actually watch him do it