New Cougar Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
4,861 Posts
Discussion Starter · #1 ·
I'm looking to do this mod in the very near future, but I'd like to know if any other 99+ ATX drivers have done this, and if someone could give me a how to on installation. The only parts that I seem to be slightly weary of are the taps to the sensors and the injector work.

Any ideas or help would be greatly appreciated!
 

·
Registered
Joined
·
4,861 Posts
Discussion Starter · #3 ·
*Bump*

Someone has to have a little more information about this... I'd like to get it installed this weekend, but the installation instructions SUCK!!!
 

·
Registered
Joined
·
1,522 Posts
sensor taps are easy, get the pin our for the PCM to locate the right wires, you can pry the connect back from behind the PS reservoir and take off the back black plastic piece to access the wires. I used a piece of aluminum to cover under the area i was soldering, although you still have to have a steady hand... probably take about 4 hours
 
1 - 5 of 5 Posts
Top