New Cougar Forum banner

Stock Gauges Color Swap

1K views 9 replies 7 participants last post by  rooster210 
#1 ·
How should I go about changing the color of my gauges? I can't stand the green anywhere in my interior, i'd switch it all if i could.
 
#8 ·
ya, using a blade works SOOOOOOOOO much better than using stupid q tips. i tried using q tips as suggested in many threads and screwed up the face of my atx bezel. so i got a new one, used a dab of nail polish remover and scraped the green off with a little sharp knife and it turned out PERFECT.
 
#7 ·
remember that by removing all of the stock color with a blade, and making all of the areas uncovered you will have a dark spot at the top of the gauges (where the original paint was the lightest) compared to the rest of the gauges.
 
#10 ·
folded up sandpaper works good for green removal too, I used 400 grit wet dry paper. wet it down as well as the back of the gauge cluster and it comes off fairly easily.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top