New Cougar Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
What is a good way, to get a good jump off the line. If your racing an Auto.
 

·
Registered
Joined
·
1,028 Posts
hold the brake down, then rev the car to about 2200 or however much higher u can get it then let off the brake and floor it.

3 inch piping? That might be a little overkill man, might wanna downgrade to 2.5, itll give you more lowend power(faster off the line power)
 

·
Registered
Joined
·
20 Posts
Discussion Starter · #5 ·
So with my 3 inch piping have I gain or lost power?
 

·
Registered
Joined
·
9,290 Posts
Originally posted by: 01blkcat
Never floor an automatic right off the bat... let it move until 3,400-3,500 and then floor it as the secondaries are opening... you'll gain a lot more doing it that way.

I tried that and ran a 17.5. It's all about the launch from my experience.

3" piping would have hurt your car unless you have some sort of forced induction.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top