New Cougar Forum banner
1 - 6 of 6 Posts

·
Banned
Joined
·
3,229 Posts
Discussion Starter · #1 ·
Is your blinker fast after installing led turn signals? This is what you do.

-If you have front and back led turn signal leds you need a 3 ohm 50 watt resister.

-If you only have rear or front turn signal leds you need a 6 ohm 50 watt resister.

 

·
Registered
Joined
·
1,258 Posts
hey....now..i needed this.. i have some...
 

·
Registered
Joined
·
378 Posts
i know they sell complete hookup kits for this fix. Here is the link. LED Blinker Fix. Scroll down about half way to where it says load resistor kits. These work great. I bought a set for $15 shipped and they fixed my front turn signal problem. Would recommend to anyone. They also sell them on ebay.
 

·
Registered
Joined
·
1,258 Posts
Originally posted by: hotguyincougar
i know they sell complete hookup kits for this fix. Here is the link. LED Blinker Fix. Scroll down about half way to where it says load resistor kits. These work great. I bought a set for $15 shipped and they fixed my front turn signal problem. Would recommend to anyone. They also sell them on ebay.
did u use ur credit card? and how long did it take 2 ship
 

·
Registered
Joined
·
378 Posts
If you type in led fix in ebay you will be able to find them as well. Thats where I got mine. And yes you can use your credit card and it only took about 1- 1 1/2 weeks to get them (at the most).
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top