New Cougar Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
334 Posts
Discussion Starter · #1 ·
Ok so my girlfriends cousin nailed my bumper today and she offered to pay for it but i need a whole new bumper.....so what i was thinking was get a new bumper from customcougars.com and then install some foglights in the new bumper and connect them to the old wires the factory fogs were using so that way i don't have to add a new switch....will this work...or how would i go about doin this??? and last but not least what is a good brand fog light with a blueish tint or light. thanks
 

·
Registered
Joined
·
334 Posts
Discussion Starter · #2 ·
Well....I guess I am on my own huh guys.....thanks for all the views and no help...I think all i have to do is install a relay but i am not to sure though. guess i will find out
 

·
Registered
Joined
·
378 Posts
no you wouldn't have to install a relay....just whenever you get a set of foglights, cut the plugs from the stock fog lights and wire them directly to the foglight wires....there should be two of them the + and - with the black being -......if you don't have the stock plugs from the lights just cut the plug off of the car and use solderless wire connectors (male/female spade or anything you want) just to connect the wires from the car to the foglight....if you have any further questions feel free to ask here or pm me
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top