Trw3 & Trw7

StealthyWeasel · 11-23-2006, 03:08 PM

I just did a little experimenting with Warmonger. If this makes any difference with those that have PRP and own few codes, it might be good to know that TRW3 and TRW7 ECU codes are interchangable. A tune on one ECU will work on the other.

cpapashley · 11-24-2006, 06:56 AM

Is that the catch code stealthy. My code on the pv is tsw0 I wonder if that is interchangeable with anything?

warmonger · 11-25-2006, 11:30 PM

Hard to say.

I've done this a few times but only on the same type of car within the same family of tune. Going up in tune number seems fine. But this is the first time I loaded a lower number over a higher number.

11-23-2006, 03:08 PM	#1 (permalink)
StealthyWeasel NECO Member Join Date: Sep 2005 Posts: 4,123 Images: 5	Trw3 & Trw7 I just did a little experimenting with Warmonger. If this makes any difference with those that have PRP and own few codes, it might be good to know that TRW3 and TRW7 ECU codes are interchangable. A tune on one ECU will work on the other. __________________ Currently: 215whp/194wtq runs 14.4@97 The new plan: 04/05 3L, Wrapped WR Headers, WR Y Pipe-->2.5"ss QTP electric dump valve in place of cat, SVT Cams, SS3/Fidanza, 24# Injectors, Dyno Tune, Quaife LSD + B1 Gearset

11-24-2006, 06:56 AM	#2 (permalink)
cpapashley NECO Member Join Date: Sep 2006 Location: Cleveland Australia Posts: 685	Re: Trw3 & Trw7 Is that the catch code stealthy. My code on the pv is tsw0 I wonder if that is interchangeable with anything? __________________ A Mazda MPV is really only a cougar in family friendly clothing............

11-25-2006, 11:30 PM	#3 (permalink)
warmonger NECO Member Join Date: Feb 2003 Location: Central Texas Posts: 776	Re: Trw3 & Trw7 Hard to say. I've done this a few times but only on the same type of car within the same family of tune. Going up in tune number seems fine. But this is the first time I loaded a lower number over a higher number. __________________ My project website Nautilus Performance We are now an authorized SCT Dealer![SIGPIC]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)