6 speed transmission.

Gorman · 05-16-2008, 08:36 PM

my tranny is coming to the end of its life (aahhh). I would like to replace it with an ST220 6 speed. I know the speed sensor is different..is it possible to revert it back to the type in my 5 speed. Are there any other issues i need to over come to get this done ?...G.

MOMO · 05-16-2008, 08:58 PM

is st220 even available in the States?

Gorman · 05-16-2008, 09:06 PM

anything is possible..this week i was talking to a guy who has the 4 wheel drive setup for the 2.0L guys..i just need to know if a 6 speed transmission from a 3.0L duratec will bolt up and link up to the 2.5L... G.

StealthyWeasel · 05-19-2008, 08:12 AM

If you're going that far you should save for a 3L to mate to it.

bensenvill · 05-19-2008, 03:06 PM

I was under the impression the axle lengths were different....

SlowCat · 05-19-2008, 06:11 PM

I'm pretty sure they are different ... The transmission is slight different in size, but yes you can make it work.

I believe Terry Haines went through everything to make a conversion kit, but decided not to because of the cost of the transmission. I can only imagine what shipping would be on one. He would be the person to email for the details about using one.

MagicHallucinations · 05-19-2008, 06:24 PM

Quote:

Originally Posted by bensenvill

I was under the impression the axle lengths were different....

You could solve that by purchasing the hubs, rotors, calipers, etc. How much is the 6spd transmission just out of curiosity?

MOMO · 05-19-2008, 06:26 PM

Quote:

Originally Posted by MagicHallucinations

You could solve that by purchasing the hubs, rotors, calipers, etc. How much is the 6spd transmission just out of curiosity?

bet it wouldnt be that much... but shipping would double the price, i bet.

canadiancougar · 05-19-2008, 06:32 PM

Good luck getting info including prices from overseas on any ST220 parts. I've emailed so many different places in regards as to where to get ST220 manifolds, TB's and other parts but have had no luck.

SlowCat · 05-19-2008, 06:32 PM

Quote:

Originally Posted by MOMO

bet it wouldnt be that much... but shipping would double the price, i bet.

I would agree ... Shipping would be horrible, Just getting an intake shipped was over $200 & that is much ligher & smaller than a full transmission.

05-16-2008, 08:36 PM	#1 (permalink)
Gorman NECO Member Join Date: Mar 2006 Location: London, U.K. Posts: 706 Images: 5	6 speed transmission. my tranny is coming to the end of its life (aahhh). I would like to replace it with an ST220 6 speed. I know the speed sensor is different..is it possible to revert it back to the type in my 5 speed. Are there any other issues i need to over come to get this done ?...G. __________________ 2.5L MTX. SVT ECU. 2 Cold air feeds. Hogged out MAF. 65mm P+P TB. Port matched SVT upper to SVT LIM. MSDS Headers. Optimized Y pipe. Test pipe. Wish list. 4X4 wtb aussie endlinks with poly bushes

05-16-2008, 08:58 PM	#2 (permalink)
MOMO She purrs ;) Join Date: Dec 2005 Location: Rovinj, Croatia Posts: 4,438	Re: 6 speed transmission. is st220 even available in the States? __________________ *Phase two complete... phase three commences...* http://tuning-istra.com/forum/garage...ad52235c8b961b

05-16-2008, 09:06 PM	#3 (permalink)
Gorman NECO Member Join Date: Mar 2006 Location: London, U.K. Posts: 706 Images: 5	Re: 6 speed transmission. anything is possible..this week i was talking to a guy who has the 4 wheel drive setup for the 2.0L guys..i just need to know if a 6 speed transmission from a 3.0L duratec will bolt up and link up to the 2.5L... G. __________________ 2.5L MTX. SVT ECU. 2 Cold air feeds. Hogged out MAF. 65mm P+P TB. Port matched SVT upper to SVT LIM. MSDS Headers. Optimized Y pipe. Test pipe. Wish list. 4X4 wtb aussie endlinks with poly bushes

05-19-2008, 08:12 AM	#4 (permalink)
StealthyWeasel NECO Member Join Date: Sep 2005 Posts: 4,041 Images: 5	Re: 6 speed transmission. If you're going that far you should save for a 3L to mate to it. __________________ 3L frozen in time @ 96,412. 50k driven since purchase and 100% reliable. This place

05-19-2008, 03:06 PM	#5 (permalink)
bensenvill is moving his car Join Date: Aug 2003 Location: Chicago Posts: 12,976 Blog Entries: 4	Re: 6 speed transmission. I was under the impression the axle lengths were different.... __________________ 1994 Lincoln Towncar w/ 112576 1996 Contour SE MTX loaded w/ 137179 1999 Silver Frost ATX original owner w/ 70500 RUNNING!!!!

05-19-2008, 06:11 PM	#6 (permalink)
SlowCat NECO Member Join Date: Mar 2006 Location: Columbus, OH Posts: 279	Re: 6 speed transmission. I'm pretty sure they are different ... The transmission is slight different in size, but yes you can make it work. I believe Terry Haines went through everything to make a conversion kit, but decided not to because of the cost of the transmission. I can only imagine what shipping would be on one. He would be the person to email for the details about using one.

05-19-2008, 06:32 PM	#9 (permalink)
canadiancougar NECO Member Join Date: Jun 2006 Location: Ottawa, Canada Posts: 988 Images: 1	Re: 6 speed transmission. Good luck getting info including prices from overseas on any ST220 parts. I've emailed so many different places in regards as to where to get ST220 manifolds, TB's and other parts but have had no luck. __________________ 3L BUILD COMING SOON!!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode