My 3.0L Threw Code P0183

Monkeygrits · 06-30-2008, 11:17 AM

In my 05 Escape

It says Fuel Temp Sensor and I don't think it has one of those...
This is greek to me. It is running perfectly fine but threw a CEL
I searched but don't know if the codes are the same from the 2.5 to the 3.0
I looked it up in the sticky above and I have not clue WTF to do with it....
Can someone translate please?

| P0183 - Engine Fuel | The comprehensive | * Open or short to | Verify EFT-PID value |
| Temperature Sensor A | component monitor | PWR in harness. | to determine open or |
| Circuit High Input | (CCM) monitors the EFT | * Damaged EFT sensor. | short.
| (EFT)-----------------| sensor circuit to the | * Improper harness
|------------------------| If voltage were to | * Damaged PCM.
-------------------------| exceed a calibrated
|------------------------| limit and a calibrated |
|------------------------| amount of time during
|------------------------| testing, the test will
|------------------------| fail.

Thanks in advance and those damn colums wont copy straight either

Monkeygrits · 07-01-2008, 08:56 AM

Heres the answer I got from Escape-Central. Just for future reference. I guess we'll see if it works. Does this look like the problem? I wish our cars had a cutout for the fuel pump like that

Escape-Central - P0183 Halp!!!

06-30-2008, 11:17 AM	#1 (permalink)
Monkeygrits A RoundHouse To The FACE Join Date: May 2001 Location: SW Pennsylvania Posts: 2,609 Images: 2	My 3.0L Threw Code P0183 In my 05 Escape It says Fuel Temp Sensor and I don't think it has one of those... This is greek to me. It is running perfectly fine but threw a CEL I searched but don't know if the codes are the same from the 2.5 to the 3.0 I looked it up in the sticky above and I have not clue WTF to do with it.... Can someone translate please? \| P0183 - Engine Fuel \| The comprehensive \| * Open or short to \| Verify EFT-PID value \| \| Temperature Sensor A \| component monitor \| PWR in harness. \| to determine open or \| \| Circuit High Input \| (CCM) monitors the EFT \| * Damaged EFT sensor. \| short. \| (EFT)-----------------\| sensor circuit to the \| * Improper harness \|------------------------\| If voltage were to \| * Damaged PCM. -------------------------\| exceed a calibrated \|------------------------\| limit and a calibrated \| \|------------------------\| amount of time during \|------------------------\| testing, the test will \|------------------------\| fail. Thanks in advance and those damn colums wont copy straight either __________________ Finally Made A Cardomain Site!!!!!!!! CougarDB Monkey's Myspace Last edited by Monkeygrits; 06-30-2008 at 11:57 AM.

07-01-2008, 08:56 AM	#2 (permalink)
Monkeygrits A RoundHouse To The FACE Join Date: May 2001 Location: SW Pennsylvania Posts: 2,609 Images: 2	Re: My 3.0L Threw Code P0183 Heres the answer I got from Escape-Central. Just for future reference. I guess we'll see if it works. Does this look like the problem? I wish our cars had a cutout for the fuel pump like that Escape-Central - P0183 Halp!!! __________________ Finally Made A Cardomain Site!!!!!!!! CougarDB Monkey's Myspace

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)