Codes Galore

travster · 05-28-2008, 11:07 PM

P1744, P0402, & P1401

If anyone knows where I could start before I seek out a diagnostic test I would love to hear your ideas.

FastCougar · 05-28-2008, 11:48 PM

A search ... either here or on Google would be a good first start

travster · 06-01-2008, 06:35 AM

Quote:

Originally Posted by FastCougar

A search ... either here or on Google would be a good first start

I've determined that codes P0402 & P1401 are likely related to a problem with the DPFE sensor, so I'll try replacing that soon.

I want to replace the TCC solenoid in an attempt to remedy the P1744 code before I go see a transmission specialist. Does anyone know how to do this? I cannot find instructions specific to the CD4E.

brapple · 06-02-2008, 07:18 AM

P1744Torque Converter Clutch System Stuck in Off Position.

doesn't sound good at all ... don't know anything about the atx so I can say what it means

P0402EGR Flow Excessive at Idle.

P1401Differential Pressure Feedback Electronic Sensor circuit High Voltage.

time for a new dpfe sensor.

travster · 06-02-2008, 11:27 AM

I'm replacing the DPFE sensor tomorrow.

Does anyone know how to replace the TCC solenoid?

travster · 06-03-2008, 10:30 PM

Bump.
I can't find this info anywhere.

zorrex · 06-03-2008, 10:40 PM

Read this thread from CEG:

new 98 contour owner - CEG Forums

It's a bit of mumbo-jumbo but maybe it can be made sense of. Try to obtain a Ford CD repair manual. Contact todras on CEG. Most everything is the same between the two vehicles...

05-28-2008, 11:07 PM	#1 (permalink)
travster NECO Member Join Date: May 2008 Location: Virginia Beach, VA Posts: 62	Codes Galore P1744, P0402, & P1401 If anyone knows where I could start before I seek out a diagnostic test I would love to hear your ideas.

05-28-2008, 11:48 PM	#2 (permalink)
FastCougar In search of more boost! Join Date: Nov 1999 Location: Kearneysville, WV Posts: 8,088 Images: 732	Re: Codes Galore A search ... either here or on Google would be a good first start __________________ 1999 Mercury Cougar - Turbo'd 3L. Status: Working on cooling issue and concerned about 150psi compression test on cylinder #5. Power: 391.9 hp @ 6750 rpm \| 374.2 lbs/ft. @ 4250 rpm \| boost @ 11 psi For Sale: 19" Konig Verdicts with Toyo ProxesFZ4 225/35ZR19 Tires - $850 shipped! "There are times when I wish someone would implement facepunching over TCP/IP" - NorCalCoug

06-02-2008, 07:18 AM	#4 (permalink)
brapple NECO Member Join Date: Oct 2004 Location: Enfield, CT Posts: 1,073	Re: Codes Galore P1744Torque Converter Clutch System Stuck in Off Position. doesn't sound good at all ... don't know anything about the atx so I can say what it means P0402EGR Flow Excessive at Idle. P1401Differential Pressure Feedback Electronic Sensor circuit High Voltage. time for a new dpfe sensor. __________________ - 95 Mystique LS Zetec 5-spd - 99 Contour SeVT Duratec 5-spd (3L and NPG Turbo Kit) - 2k Contour SVT - #2137

06-02-2008, 11:27 AM	#5 (permalink)
travster NECO Member Join Date: May 2008 Location: Virginia Beach, VA Posts: 62	Re: Codes Galore I'm replacing the DPFE sensor tomorrow. Does anyone know how to replace the TCC solenoid?

06-03-2008, 10:30 PM	#6 (permalink)
travster NECO Member Join Date: May 2008 Location: Virginia Beach, VA Posts: 62	Re: Codes Galore Bump. I can't find this info anywhere.

06-03-2008, 10:40 PM	#7 (permalink)
zorrex NECO Member Join Date: Aug 2007 Location: E. Longmeadow/Amherst, MA Posts: 246	Re: Codes Galore Read this thread from CEG: new 98 contour owner - CEG Forums It's a bit of mumbo-jumbo but maybe it can be made sense of. Try to obtain a Ford CD repair manual. Contact todras on CEG. Most everything is the same between the two vehicles... __________________ Ian - ATX Zetec

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode