FS: E-Flite Blade CP+ electric RC helicopter RTF

**StuartGrant** · 2009-09-21 12:52 PM

Before I post this in the FS section, thought I would give you guys a shout on this.

For sale is a practically brand new E-Flite Blade CP+ ready to fly (RTF) helecopter bought back in June. Includes standard 6 channel 72Mhz FM transmitter and receiver, transmitter does have a trainer plug, not sure if it'll work with other brand of remotes, it is channel 50, or 72.59mhz . Battery is a three cell (12v) Lithium Polymer (LiPo) battery rated at 800 mah. Charger is the stock unit, I am also including the wall adapter for use with 110 VAC @ 60 hz (American standard household current). Transmitter takes 8 AA's, currently have the stock Alkaline batteries in there, but there is charging circuitry in there for NiCd's. Training gear is included, as well as the manual, as well as the symmetrical blade set that came with the unit.

I did get the thing in the air once for a few uncontrolled moments, but it desperately wanted to get back on the ground. The monocote came off of both blades at the tip, and the balsa underneath became a little dented. I ordered a crash rebuild kit from horizon and should be good as new, but I don't have a pitch gauge to check... The rest of the crash kit will come with it as well, including a new set of landing gear and rear rotor.

I'll post a pic tonight. I'll also be going to the Famous Daves meet on the 3rd if anyone wants a look at it.

Great second RC heli, to bad I tried to make it my first...

I paid $170 for it new, sunk about $30 into the charger and repair kit, asking $90 for the whole thing, we can arrange a meet, I would prefer not to ship though.

**StuartGrant** · 2009-09-22 08:42 PM

Sorry for the delay on the pics, here they are.

Note, the package also came with a set of wood symetrical blades for more advanced flight, as well as the old set, they should be usable, or repairable, but I didn't want to start messing with the blades. Also included is a foam blade holder, pictured.