Looking for a good exhaust shop!

Tommyboy · 11-07-2006, 03:42 AM

Fellas, i have some MSDS headers which should be at my door this wednesday, and i need to have some 02 bungs welded into place for them to work with my 99 because the headers were for a 01. Do any of you know a good exhaust place around here that could do that? Iv only seen one which is in Shakopee and the dude there is drunk all the time when i am talking to him, and the dummbass installed the wrong exhaust on my car when i had it down there over the summer so i am looking else where. Also i might have to have them throw on my y pipe and catback while i am at it. My other question is that i have a used borla exhaust from Chris (blackcoug) sitting in my garage that will need to go on, but should i wait till after winter is over so no salt will built up on it? I know borla holds up very well, but i thouht id ask you guys first! Thanks, ~Wonder Boy~ aka Nacho, aka tommyboy

Catwoman3700 · 11-07-2006, 04:14 AM

Um yea...mine's sounding like crap too. I'd like to get it re-done. Anyone know a place that doesnt rape you too bad without any lube? heheh...ok that was inappropriate.

cougar4life · 11-07-2006, 04:22 AM

Quote:

Originally Posted by Tommyboy

Fellas, i have some MSDS headers which should be at my door this wednesday, and i need to have some 02 bungs welded into place for them to work with my 99 because the headers were for a 01. Do any of you know a good exhaust place around here that could do that? Iv only seen one which is in Shakopee and the dude there is drunk all the time when i am talking to him, and the dummbass installed the wrong exhaust on my car when i had it down there over the summer so i am looking else where. Also i might have to have them throw on my y pipe and catback while i am at it. My other question is that i have a used borla exhaust from Chris (blackcoug) sitting in my garage that will need to go on, but should i wait till after winter is over so no salt will built up on it? I know borla holds up very well, but i thouht id ask you guys first! Thanks, ~Wonder Boy~ aka Nacho, aka tommyboy

Don't trust them with some drunk moron.

Quote:

Originally Posted by Catwoman3700

Um yea...mine's sounding like crap too. I'd like to get it re-done. Anyone know a place that doesnt rape you too bad without any lube? heheh...ok that was inappropriate.

Thats okay Heidi. You can be inappropriate. If anyone has a problem with that just get out the whip.

Blackcoog · 11-07-2006, 09:37 AM

Go to Pitcrew Performance in Fridley. They did an awesome job on my car and are great guys to work with. The number is 763-795-9595. BTW I wouldn't consider them the cheapest in town but they definately do a very good job. Get a quote before having them work on it if you are worried about cost.

wanderingmind · 11-07-2006, 01:59 PM

You can throw the exhaust on there now. The only thing that *might* happen is the pipes get somewhat rusty. But, they won't rust through, unless you keep the car for like eleventy billion years.

Taras · 11-07-2006, 02:06 PM

I know a nice guy that helped me with my car last year. He used to own propulshion but now has a shop at white bear lake. I haven't talked to him in a while. But i was planning on visiting him some time this week. if you want i can usk him how much it will cast to go what you want. He is a very nice guy and is not looking to rape any one off. He welded my exhast.

wanderingmind · 11-07-2006, 02:37 PM

Those guys at Propulshun are a bunch of tools.

Taras · 11-07-2006, 02:47 PM

the guy who was there last is a nice guy. the guys at RC motors are dumb.

Quote:

Originally Posted by wanderingmind

Those guys at Propulshun are a bunch of tools.

Tommyboy · 11-07-2006, 08:15 PM

Quote:

Originally Posted by Blackcoog

Go to Pitcrew Performance in Fridley. They did an awesome job on my car and are great guys to work with. The number is 763-795-9595. BTW I wouldn't consider them the cheapest in town but they definately do a very good job. Get a quote before having them work on it if you are worried about cost.

Yea ill give them a call and see what they can do!

Icefury · 11-17-2006, 12:46 PM

I use...

Jeff-Ex
125 Nelson Blvd
Montrose, MN 55363
763-675-3211

He has a performance exhaust shop and can do mandrel bends up to 4" and has a MIG welder for stainless steel welding. Very few exhaust shops can do all this. Can accomidate low riding cars. Does damn fine work and is worth the drive (just outside the cities). Hell of a nice guy (Jeff the owner) and lets you make yourself at home in his shop and work bay.

11-07-2006, 03:42 AM	#1 (permalink)
Tommyboy NECO Member Join Date: Jan 2006 Location: Minnesota, Apple Valley Posts: 563	Looking for a good exhaust shop! Fellas, i have some MSDS headers which should be at my door this wednesday, and i need to have some 02 bungs welded into place for them to work with my 99 because the headers were for a 01. Do any of you know a good exhaust place around here that could do that? Iv only seen one which is in Shakopee and the dude there is drunk all the time when i am talking to him, and the dummbass installed the wrong exhaust on my car when i had it down there over the summer so i am looking else where. Also i might have to have them throw on my y pipe and catback while i am at it. My other question is that i have a used borla exhaust from Chris (blackcoug) sitting in my garage that will need to go on, but should i wait till after winter is over so no salt will built up on it? I know borla holds up very well, but i thouht id ask you guys first! Thanks, ~Wonder Boy~ aka Nacho, aka tommyboy __________________ Key my car and i will rip ya a new Bung-Hole! http://www.myspace.com/22237139

11-07-2006, 04:14 AM	#2 (permalink)
Catwoman3700 NECO Member Join Date: Apr 2002 Posts: 1,313	Re: Looking for a good exhaust shop! Um yea...mine's sounding like crap too. I'd like to get it re-done. Anyone know a place that doesnt rape you too bad without any lube? heheh...ok that was inappropriate. __________________ MySpace!! AOL: hawaiianme NorCalCoug: Look at you and your scandal! I swear, all the pretty girls can't help but wrap themselves in scandal like it's a giant blanket to keep them warm on a cold night.

11-07-2006, 09:37 AM	#4 (permalink)
Blackcoog 3L Install Maestro Join Date: Oct 2000 Location: Minneapolis, MN Posts: 4,631	Re: Looking for a good exhaust shop! Go to Pitcrew Performance in Fridley. They did an awesome job on my car and are great guys to work with. The number is 763-795-9595. BTW I wouldn't consider them the cheapest in town but they definately do a very good job. Get a quote before having them work on it if you are worried about cost. __________________ Current Rides 1999 MTX Cougar, 3L Supercharged 325hp and 278tq 1999 SVT Contour, Ported 3L Visit: http://www.3lduratec.com For info on ready to drop in 3L's and our supercharger kit.

11-07-2006, 01:59 PM	#5 (permalink)
wanderingmind NECO Member Join Date: Sep 2004 Location: St. Paul, MN Posts: 2,788	Re: Looking for a good exhaust shop! You can throw the exhaust on there now. The only thing that might happen is the pipes get somewhat rusty. But, they won't rust through, unless you keep the car for like eleventy billion years. __________________ "You're captives of a civilizational system that more or less compels you to go on destroying the world in order to live." - Ishmael 2001 Cougar 2.5L MTX My old '99 MTX cougar

11-07-2006, 02:06 PM	#6 (permalink)
Taras NECO Member Join Date: May 2006 Location: Saint Paul Posts: 1,536	Re: Looking for a good exhaust shop! I know a nice guy that helped me with my car last year. He used to own propulshion but now has a shop at white bear lake. I haven't talked to him in a while. But i was planning on visiting him some time this week. if you want i can usk him how much it will cast to go what you want. He is a very nice guy and is not looking to rape any one off. He welded my exhast. __________________ TurboXS Stealth back exhaust (Up/Down, 3" cat) Stage 2 reflash Tokico D-spec, Prodrive springs Rota SDR 17" Gold Wheels

11-07-2006, 02:37 PM	#7 (permalink)
wanderingmind NECO Member Join Date: Sep 2004 Location: St. Paul, MN Posts: 2,788	Re: Looking for a good exhaust shop! Those guys at Propulshun are a bunch of tools. __________________ "You're captives of a civilizational system that more or less compels you to go on destroying the world in order to live." - Ishmael 2001 Cougar 2.5L MTX My old '99 MTX cougar

11-17-2006, 12:46 PM	#10 (permalink)
Icefury NECO Member Join Date: Dec 2000 Location: Minneapolis, MN Posts: 346	Re: Looking for a good exhaust shop! I use... Jeff-Ex 125 Nelson Blvd Montrose, MN 55363 763-675-3211 He has a performance exhaust shop and can do mandrel bends up to 4" and has a MIG welder for stainless steel welding. Very few exhaust shops can do all this. Can accomidate low riding cars. Does damn fine work and is worth the drive (just outside the cities). Hell of a nice guy (Jeff the owner) and lets you make yourself at home in his shop and work bay. __________________ Icefury's 2000 3.0 Hybrid SVT Contour

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode