Bloody Knuckle Weekend Part 1

Afroman · 11-13-2005, 10:38 PM

Well as winter approaches I had to do some last minute maintenance!

1.) Brake pads front and rear and a rotor turning was an absolute must! My pads practically disintegrated! I need new rotors as well. KVR rotors are terrible!

2.) Oil Changes for two cars

3.) Took off my purple underbodies. For good. I rarely use them and they are just in the way. If any one is interested in neons cheep let me know!

4.) Attempted to adjust my Ground Controls. But ... they are siezed so I am going to have to take the whole strut assembly apart

. Man I have some SERIOUS toe in wear. Currumba! New Kuhmos for next year I guess.

Part 2 = clean and paint my MSDS Y-pipe. I have the outdated ceramic(CRAP) coating that just falls off. And fix my coilovers. Maybe new rotors.. but cash is getten tight

.

-afroman

fordrule · 11-13-2005, 11:30 PM

if u need a hand, let us know. i am by nashville. i like to work.....well when i get the 3L done i can move around better.....

use liquid wrench on the coilovers or possibly WD-40

Afroman · 11-14-2005, 09:59 AM

I tried the WD-40 before... the bolt is stripped out

I dont think it will be a huge deal to do all four corners... fingers crossed!

I would love to see your 3.0L! I want to do one too, I just have to plan it right. Which may take a while

-afroman

11-13-2005, 10:38 PM	#1 (permalink)
Afroman NECO Member Join Date: Nov 2005 Location: United States Posts: 721	Bloody Knuckle Weekend Part 1 Well as winter approaches I had to do some last minute maintenance! 1.) Brake pads front and rear and a rotor turning was an absolute must! My pads practically disintegrated! I need new rotors as well. KVR rotors are terrible! 2.) Oil Changes for two cars 3.) Took off my purple underbodies. For good. I rarely use them and they are just in the way. If any one is interested in neons cheep let me know! 4.) Attempted to adjust my Ground Controls. But ... they are siezed so I am going to have to take the whole strut assembly apart . Man I have some SERIOUS toe in wear. Currumba! New Kuhmos for next year I guess. Part 2 = clean and paint my MSDS Y-pipe. I have the outdated ceramic(CRAP) coating that just falls off. And fix my coilovers. Maybe new rotors.. but cash is getten tight . -afroman

11-13-2005, 11:30 PM	#2 (permalink)
fordrule back in the states Join Date: Dec 2002 Location: Clarksville, TN/ Fort Campbell, KY Posts: 5,627 Blog Entries: 1	Re: Bloody Knuckle Weekend Part 1 if u need a hand, let us know. i am by nashville. i like to work.....well when i get the 3L done i can move around better..... use liquid wrench on the coilovers or possibly WD-40 __________________ We Can Rebuild Her 3L MoToR:02 3L, SVT UIM/LIM/TB/INJ/CAMS, st200 springs, pnp, xcal 2,PRP, hi-flo cat HMS prepped mtx-75:quaife, slick shift forks, "koated kogbox", focus tower, B&M. car mod: GMK HP CF CAI, weapon r headers, relocated battery, st200 RTSB, OMP FTSB, GC, roush swaybar, Audi RS6 HIDs, angel eyes, CF fenders/hood/mirror caps/ eclipse gas door, painted taillight covers/headlight inserts, WW grill,18" centerline,Full Roush lip Kit and spoiler, 17" Roush Ver. 2 wheels.

11-14-2005, 09:59 AM	#3 (permalink)
Afroman NECO Member Join Date: Nov 2005 Location: United States Posts: 721	Re: Bloody Knuckle Weekend Part 1 I tried the WD-40 before... the bolt is stripped out I dont think it will be a huge deal to do all four corners... fingers crossed! I would love to see your 3.0L! I want to do one too, I just have to plan it right. Which may take a while -afroman

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)