Triple A-pillar Pod ~Lotek~ !!NOW AVAILABLE!!! - Page 14

JonDoe · 09-19-2006, 10:39 PM

yea....... good call. whats the dimension for the gauges? I need to know that.

Funkboy316 · 09-19-2006, 11:00 PM

Quote:

Originally Posted by Sham

mmmmmm i hope theres enough room on the pillar to fit 3 and not look goofy, ive been considering that for awhile now, how it would look cause i have a nice dash mod idea kickin around my head. if this price is right ill put my money where my mouth is so no worries

not to hijack but there is plenty room on the pillar for 3 gauges, here is one i custom made. also the gauges for the lotek will be a standard 52mm (2 1/16).
i had the lotek 2 gauge pod but sold it and made this one. see for pics:
http://www.newcougar.org/forums/show...557#post980557

Sham · 09-19-2006, 11:28 PM

dont worry no hijack thats just what everyone needs to see

RodneyBur · 09-19-2006, 11:44 PM

GO ahead and put me down for one. Anyone know how the payments will work? Do we prepay full amount prior to production or do we make a deposit or what? Who are we going to pay?

I'd rather be able to pay about 3 weeks from friday but can scrounge the cash sooner if need be. Just need to know how its going to work so I can set cash aside. I'm locked into warmonger bracket group buy so its coming first.

Thanks.

mond12345 · 09-20-2006, 01:25 AM

Quote:

Originally Posted by RodneyBur

Just need to know how its going to work so I can set cash aside. I'm locked into warmonger bracket group buy so its coming first.

Thanks.

Yes you are sir since you will be taking my spot.

mond12345 · 09-20-2006, 01:31 AM

Funkboy316: You didn't no a hijack my friend. Thanks for your post, thats the exact thing we are looking for.

JonDoe: They will be 2 1/16 (52mm) like the standard two pod.

Taken from Lotek's website:

Attention car clubs and Internet forum groups. We can manufacture custom gauge holders for your vehicle. Prices starting at just $20 for single pods. Full-length pillars as low as $39.

Minimum order quantity is 30 per project. Some models may require a higher minimum. If both double and triple gauge holders are requested, this represents two projects and consequently, requires 30 pre-paid units each. All orders must be paid prior to project start. Pricing will be determined after receipt of OEM part for evaluation. Most of our products range from $40-$60 ea. Shipping charges and color matching is extra.

Im going to email them and get more details but im pretty sure they are going to want the full price after they determine it.

Sham · 09-20-2006, 02:31 AM

**** them KK FTW

RodneyBur · 09-20-2006, 09:53 PM

Quote:

Originally Posted by mond12345

Prices starting at just $20 for single pods. Full-length pillars as low as $39.

Most of our products range from $40-$60 ea. Shipping charges and color matching is extra
.

So noone really knows the price. Not even them. ?

mond12345 · 09-21-2006, 12:53 AM

FINALLY price no, range yes.

JonDoe · 09-21-2006, 10:52 AM

all this hipe and still no dice..... bump for the 100th time. If this falls through I think We'll get the award.

THREAD WITH THE MOST REPLIES THAT NEVER REALLY DID ANYTHING FOR ANYBODY!

09-19-2006, 10:39 PM	#131 (permalink)
JonDoe NECO Member Join Date: Mar 2004 Location: Fort Wayne, IN Posts: 352	Re: Gauging Interest for Triple A-pillar Pod ~Lotek~ yea....... good call. whats the dimension for the gauges? I need to know that. __________________ *wtb:Dual Exhaust*

09-19-2006, 11:44 PM	#134 (permalink)
RodneyBur NECO Member Join Date: Nov 2002 Location: Cincinnati Posts: 2,460	Re: Gauging Interest for Triple A-pillar Pod ~Lotek~ GO ahead and put me down for one. Anyone know how the payments will work? Do we prepay full amount prior to production or do we make a deposit or what? Who are we going to pay? I'd rather be able to pay about 3 weeks from friday but can scrounge the cash sooner if need be. Just need to know how its going to work so I can set cash aside. I'm locked into warmonger bracket group buy so its coming first. Thanks. __________________ 1999 Laser Red MTX 14.509 1/4 2.265 60' 2002 3L with SVT UIM, SVT LIM no secondaries, SVT Cams, SVT TB, 24# injectors, WR Headers & y-pipe, AEM Intake, SVT Clutch, Fidanza flywheel, Clevite rod bearings, ST200 valve springs, Underdrive pulleys, Escape oil pan, DMD, Magnecor KV85 Comp Wires, Polished timing cover-valve covers-MAF-TStat, Torsen LSD, Focus shift tower & forks, RP syncromax, SVT ECU, SCT Flip Chip, B&M Shifter, OMP FSTB, Mirko RSTB, Roush RSB, Roush Floor Mats, 2.5" Trubendz

09-20-2006, 01:31 AM	#136 (permalink)
mond12345 NECO Member Join Date: Nov 2004 Location: PA Posts: 3,122 Images: 14	Re: Gauging Interest for Triple A-pillar Pod ~Lotek~ Funkboy316: You didn't no a hijack my friend. Thanks for your post, thats the exact thing we are looking for. JonDoe: They will be 2 1/16 (52mm) like the standard two pod. Taken from Lotek's website: Attention car clubs and Internet forum groups. We can manufacture custom gauge holders for your vehicle. Prices starting at just $20 for single pods. Full-length pillars as low as $39. Minimum order quantity is 30 per project. Some models may require a higher minimum. If both double and triple gauge holders are requested, this represents two projects and consequently, requires 30 pre-paid units each. All orders must be paid prior to project start. Pricing will be determined after receipt of OEM part for evaluation. Most of our products range from $40-$60 ea. Shipping charges and color matching is extra. Im going to email them and get more details but im pretty sure they are going to want the full price after they determine it. __________________ 99 3.0L MTX Silver Frost - CougarDB Heavily Modded 07 Subaru STi Blue/Gold Rims - COBB Stage 1 07 Honda CBR600RR Blue/Silver - Modded also...

09-21-2006, 12:53 AM	#139 (permalink)
mond12345 NECO Member Join Date: Nov 2004 Location: PA Posts: 3,122 Images: 14	Re: Gauging Interest for Triple A-pillar Pod ~Lotek~ FINALLY price no, range yes. __________________ 99 3.0L MTX Silver Frost - CougarDB Heavily Modded 07 Subaru STi Blue/Gold Rims - COBB Stage 1 07 Honda CBR600RR Blue/Silver - Modded also...

09-21-2006, 10:52 AM	#140 (permalink)
JonDoe NECO Member Join Date: Mar 2004 Location: Fort Wayne, IN Posts: 352	Re: Gauging Interest for Triple A-pillar Pod ~Lotek~ all this hipe and still no dice..... bump for the 100th time. If this falls through I think We'll get the award. THREAD WITH THE MOST REPLIES THAT NEVER REALLY DID ANYTHING FOR ANYBODY! __________________ *wtb:Dual Exhaust*

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode