Painting your dash?

[azbobbybooshay10]

Camlen, if you need any help, I've painted mine before. I used Duplicolor paint and it looks great. I think I'm going to try to get some Sonic Blue paint though and respray them to (eventually) match the outside of the car. Like I said, let me know if you need a hand and I'll head over to your side of town to help out.
Here's how mine looks (very old pics, so alot is different now, but the panels are still the same)

[gabby.f.babiee]

i just finished mine it turned outt very nice, nicer than i thought i out some pics all i did was sand,primed,painted,clear coat and the color is gm bright in a sptray can at canadian tire i was gonna do the door handles but i ca get them out and didnt want to break it

[thousandlegs]

looks good! I like the contrast...makes it kind of feel like the red area is the 'driver cockpit' area.

[gabby.f.babiee]

ya it really turned out nice...it does look like a racecar like in nascar i used gm bright red and dupicolor clearcoat if nay 1 knows how to get the door handles out let me know ...thanks

[marinofan]

Originally Posted by gabby.f.babiee

ya it really turned out nice...it does look like a racecar like in nascar i used gm bright red and dupicolor clearcoat if nay 1 knows how to get the door handles out let me know ...thanks

If you're talking interior doorhandles, unscrew the 5 or 6 screws holding the door panel on, slide it off, you have to kind of pull cause it has some double sided tape stuff holding it on, then the door handles come out real easy. there not to hard to put back either.

[gabby.f.babiee]

here i attached a piece thats the piece highlighted that i want to take out and paint ..how do i take that piece out ???

visit my car on car domain: http://www.cardomain.com/ride/3118527

[gabby.f.babiee]

anybody know how to take the door thingy out theres a pic underneath this reply of wut i need to take out some1 help lol

[JRsmoothee]

you take a cutting torch to it and it should pop right off

[gabby.f.babiee]

yaa okaYY!!!

[02coug]

I believe to get those parts off you need to drill out the plastic welds from the factory.... (just be extra special carefull not to drill too far) it is not all that hard I did it to my doors handles and my shifter plate! I just glued them back on. Its been 4 years and no problems!!!

You could aways mask around them and then paint them... which is what I did when I first painted it!