NECO How-To PDF Links

[ice992]

I've been wanting to do this for a while, So I got with Trevor, he provided the space for me to store all these on the newcougar.org site.

I took all the How-To's I knew of, and put each in a PDF file.
Below are the direct link to each. These are exact copies of the How-To's so I take no credit or responsibility to their content. In each I listed the creator, or the user whom posted the How-To. Enjoy.

In no particular order (Hit F3, and type in a word to find matches)

(more to come w/ time)

NOTE- If you do not have Adobe Reader (or another PDF Reader) Installed you will need to do so before attempting to open these!
Available Here: Get Adobe Reader (It's Free!)

1. How To: 3rd Break Light Removal
2. How To: Use 65mm throttle body (Mustang TB)
3. How To: Replace 99-00 Alternator
4. How To: 99-00 Speedo Needle Replacement
5. How To: Add shock sensor to factory alarm system
6. How To: AIT Relocation
7. How To: ATX to MTX Swap
8. How To: Change LCD COlor
9. How To: Clean upper and lower Intake manifolds w/o removing them
10. How To: Clean MAF (Mass Airflow Sensor)
11. How To: Clean UIM w/ Seafoam
12. How To: Change Coolant
13. How To: Modify cup spiller into a CD holder
14. How To: Custom Exhaust for Under $200
15. How To: Custom Kitty head dash
16. How To: Cut the stock shifter
17. How To: Install DMD (Dual Mass Dampner)
18. How To: Install Eclipse Fuel Door
19. How To: End 1-2 Bang Shift
20. How To: Fix Dimming Lights (alt wire mod)
21. How To: Fix Heater Blower Resistor
22. How To: Install FSTB (Front Strut Tower Brace)
23. How To: Paint your gauge bezel
24. How To: Ground wire relocation
25. How To: Install Hood Pins
26. How To: Fix IMRC
27. How To: Install CAI (Cold Air Intake)
28. How To: Install Jaged RSTB (Rear Strut Tower Brace)
29. How To: Rebuild your intake system (Remove, Clean, Replace Seals, Re-Install)
30. How To: LED Swap For Dummies
31. How To: Make MIL eliminators
32. How To: Modify Flasher Blink Rate (for LED Blinkers)
33. How To: 02 Sensor replacement
34. How To: Optimize stock y-pipe
35. How To: Optimize stock or SVT TB (Throttle Body)
36. How To: Passenger Window Auto Down
37. How To: Program PATS key
38. How To: Prep Plastic pieces for Paint
39. How To: Install push button start
40. How To: Recover door panel inserts
41. How To: Safely remove driver side airbag
42. How To: Remove exhaust manifolds and precats
43. How To: Remove center console and replace ATX Shifter
44. How To: Replace Cabin Air Filter
45. How To: Replace DPFE Sensor 99-00
46. How To: Replace shift cables
47. How To: Reprogram Key Fob
48. How To: Returnless Fuel Pump Replacement
49. How To: Reverse Indigo Gauges Install
50. How To: Repair Sagging doors (bushing replacement)
51. How To: Use self diagnostics mode
52. How To: Replace Spark Plugs (2.5L v6)
53. How To: Recalibrate needles on speedometer
54. How To: Optimize stock y-pipe (2nd version)
55. How To: Remove and replace stock struts and springs
56. How To: Replace Sunroof
57. How To: Install SVT Fuel Pump
58. How To: Install SVT TB (Throttle Body)
59. How To: Throttle Hang fix (Moosing or Moose Sound)
60. How To: Tint or Nightshade your tail lights
61. How To: Underdrive pulley Install
62. How To: Install Walbro Fuel Pump
63. How To: Replace Waterpump
64. How To: Wet Sand
65. How To: Wussy lock horn fix
66. How To: Recover Headliner
67. How To: Recover Visors
68. How To: Add MP3 Input to the Factory Radio
69. How To: 2.0L Zetec Clutch Replacement
70. How To: Custom Fiberglass Sub Enclosure
71. How To: Install front sway bar endlinks
72. How To: Install rear sway bar endlinks

Any Issues, comments or concerns Please PM me!

[Jackasmacka]

Thats Awesome!

Thanks!

[ice992]

link will not work ---> "How To: Rebuild your intake system (Remove, Clean, Replace Seals, Re-Install"

thanks! fixed!

[MightyPirate]

Link will not work: How To: Make MIL eliminators

[ice992]

Link will not work: How To: Make MIL eliminators

thanks!!! fixed!!!!

[DTraudt1]

what happened to angle/demon eyes how to?

[eloyfm]

nothing on replacing a starter??

[B3NN3TT]

Starters are pretty simple. Hard job because of the tight space, but not hard to figure out. 2 bolts and some wire plugs to remove, that's it...

[Devin]

you should edit #45 to "REPLACE DPFE Sensor for 99-00" Because the DPFE sensor for 01-02's are different and located differently.

[Goldie]

dan - can you get the dash/cluster removal added into your list?