Help!!!!!!!!!!!!!!

whiteboy477 · 05-13-2006, 03:01 PM

So I have started the Headers project and have 5 of the 6 bolts out on the front and 3 out of 6 on the back. the bolt I think is striped on the front and I scared to try the stud.

The back Still needs 3 bolts out The EGR and 02 sensor.

GUYs I really need help because This is my daily driver and I dont want to pay a shop to do these.

Moraki · 05-13-2006, 07:39 PM

Don't think I'm going to have the time. I really feel for ya, but i kinda tried to warn you i wouldn't have time this week. The work i do this week can mean letter grade differences in my courses.

bensenvill · 05-14-2006, 07:19 PM

lol, I'm too far away to help... and my cars been off the road for 3 weeks now.... must... self-motivate!

whiteboy477 · 05-14-2006, 10:23 PM

Well We got a socket that cuts into bolt and got the last one off. Then we put the new front on and the y-pipe and drove it to my mechanic who is 3 mins away. Should not cost to much seeing as the back header already has 2 bolts out and one stud. O well It was a good experience to try and to all the work from under the car

sonza68 · 05-15-2006, 10:56 AM

Glad to see you got it taken care of. I felt bad when I saw your plead for help, but it wasn't until mid day on Sun, and I'd already started working on my car. Working in the rain sucks BTW.

whiteboy477 · 05-15-2006, 01:38 PM

that it is. it was kinda funny because I drove the car down there with the front header bolts just tight not torqued down and the rear manifold has 2 bolts out and one stud. We drove it down there and we could see it smoken which kinda scared me. Hopefully my guy will have it done before 330 because I got that job at best buy down in the valley and have to work this week

Woot woot for car audio.lol

slurpee · 05-15-2006, 02:45 PM

crap...i just logged on and got your message...looks like ya got it.

Moraki · 05-15-2006, 10:08 PM

You gotta log in more Steve... ya slacker... and if you dont go to CF im gonna kick your ass

slurpee · 05-16-2006, 10:53 AM

well see....gotta take care of some stuff before that happens.

sonza68 · 05-16-2006, 10:55 AM

Has your bike been fixed yet?

05-13-2006, 03:01 PM	#1 (permalink)
whiteboy477 Always in need of help Join Date: Oct 2004 Posts: 1,397	Help!!!!!!!!!!!!!! So I have started the Headers project and have 5 of the 6 bolts out on the front and 3 out of 6 on the back. the bolt I think is striped on the front and I scared to try the stud. The back Still needs 3 bolts out The EGR and 02 sensor. GUYs I really need help because This is my daily driver and I dont want to pay a shop to do these. __________________ MODS- SVT lite, CAI, MSDS headers, Borla, Short shifter, B&G, KYB, jaged RSTB, 17" Black wheels, Vtec tail light covers, Alpine system.

05-13-2006, 07:39 PM	#2 (permalink)
Moraki Is moving. Join Date: Aug 2004 Posts: 9,652	Re: Help!!!!!!!!!!!!!! Don't think I'm going to have the time. I really feel for ya, but i kinda tried to warn you i wouldn't have time this week. The work i do this week can mean letter grade differences in my courses. __________________ In wine there is wisdom, in beer there is freedom, in water there is bacteria. -Ben Franklin

05-14-2006, 07:19 PM	#3 (permalink)
bensenvill is moving his car Join Date: Aug 2003 Location: Chicago Posts: 13,280 Blog Entries: 4	Re: Help!!!!!!!!!!!!!! lol, I'm too far away to help... and my cars been off the road for 3 weeks now.... must... self-motivate! __________________ 1994 Lincoln Towncar w/ 112576 1996 Contour SE MTX loaded w/ 137179 1999 Silver Frost ATX original owner w/ 70500 RUNNING!!!!

05-14-2006, 10:23 PM	#4 (permalink)
whiteboy477 Always in need of help Join Date: Oct 2004 Posts: 1,397	Re: Help!!!!!!!!!!!!!! Well We got a socket that cuts into bolt and got the last one off. Then we put the new front on and the y-pipe and drove it to my mechanic who is 3 mins away. Should not cost to much seeing as the back header already has 2 bolts out and one stud. O well It was a good experience to try and to all the work from under the car __________________ MODS- SVT lite, CAI, MSDS headers, Borla, Short shifter, B&G, KYB, jaged RSTB, 17" Black wheels, Vtec tail light covers, Alpine system.

05-15-2006, 01:38 PM	#6 (permalink)
whiteboy477 Always in need of help Join Date: Oct 2004 Posts: 1,397	Re: Help!!!!!!!!!!!!!! that it is. it was kinda funny because I drove the car down there with the front header bolts just tight not torqued down and the rear manifold has 2 bolts out and one stud. We drove it down there and we could see it smoken which kinda scared me. Hopefully my guy will have it done before 330 because I got that job at best buy down in the valley and have to work this week Woot woot for car audio.lol __________________ MODS- SVT lite, CAI, MSDS headers, Borla, Short shifter, B&G, KYB, jaged RSTB, 17" Black wheels, Vtec tail light covers, Alpine system.

05-15-2006, 02:45 PM	#7 (permalink)
slurpee NECO Member Join Date: Jan 2001 Posts: 988	Re: Help!!!!!!!!!!!!!! crap...i just logged on and got your message...looks like ya got it. __________________ you motor boatin' son of a

05-15-2006, 10:08 PM	#8 (permalink)
Moraki Is moving. Join Date: Aug 2004 Posts: 9,652	Re: Help!!!!!!!!!!!!!! You gotta log in more Steve... ya slacker... and if you dont go to CF im gonna kick your ass __________________ In wine there is wisdom, in beer there is freedom, in water there is bacteria. -Ben Franklin

05-16-2006, 10:53 AM	#9 (permalink)
slurpee NECO Member Join Date: Jan 2001 Posts: 988	Re: Help!!!!!!!!!!!!!! well see....gotta take care of some stuff before that happens. __________________ you motor boatin' son of a

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode