Interest in Supercharger setup - Page 37

Blackcoog · 06-21-2007, 09:48 PM

I finally got the tensioner back from the shop today but it rubs the main serpentine slightly. I need to have it shortened a bit to move the pulley away from the engine about a 1/4" before I can give it a try.

I had the machine shop at my work cut it down a bit. I'll give it a try this weekend.

PREDATOR · 06-24-2007, 10:57 AM

This thing is sexy... and it will fit on an ATX! I'm still debating between doing an MTX swap and Nautilus Turbo, or leaving the car as an ATX and getting your S/C kit

mond12345 · 06-24-2007, 02:13 PM

MTX swap and turbo!

Quote:

Originally Posted by PREDATOR

This thing is sexy... and it will fit on an ATX! I'm still debating between doing an MTX swap and Nautilus Turbo, or leaving the car as an ATX and getting your S/C kit

Blackcoog · 06-26-2007, 08:15 AM

I was able to get a successful run in last night after getting everything back together and the idler seems to do it's job.

I still have an alignment issue with the idler pulley as the belt slipped over one rib on the supercharger pulley. The idler bracket needs to be cut down another 1/8" which I should be able to get done today.

edit: I just got it cut down so I can give it a try when I get home today to make sure it's all lined up correctly.

LostRacer · 06-26-2007, 12:16 PM

getting excited...

cvsmightymouse24 · 06-26-2007, 01:34 PM

I need to change my pants!!!

Blackcoog · 06-26-2007, 07:42 PM

Woot car builds boost perfectly now! 10psi on my 3L is insane.

I need to get some tuning to dial the air fuel in. I'll try and get a dyno tune setup for the car soon.

BigBalledOX · 06-26-2007, 07:46 PM

Quote:

Originally Posted by Blackcoog

Woot car builds boost perfectly now! 10psi on my 3L is insane.

I need to get some tuning to dial the air fuel in. I'll try and get a dyno tune setup for the car soon.

Commence da happy in da pants.

adam · 06-26-2007, 08:10 PM

cant wait to see a vid!!!

Blackcoog · 06-29-2007, 07:40 AM

FYI the stock SVT clutch will not hold 11psi of boost when shifting near redline....

I'm adding the intercooler back into the kit to lower intake temps and once I'm happy with the temps I'll get it dynoed.

06-21-2007, 09:48 PM	#361 (permalink)
Blackcoog 3L Install Maestro Join Date: Oct 2000 Location: Minneapolis, MN Posts: 4,461	Re: Interest in Supercharger setup I finally got the tensioner back from the shop today but it rubs the main serpentine slightly. I need to have it shortened a bit to move the pulley away from the engine about a 1/4" before I can give it a try. I had the machine shop at my work cut it down a bit. I'll give it a try this weekend. __________________ Current Rides 1999 MTX Cougar, 3L Supercharged 325hp and 278tq 1999 SVT Contour, Ported 3L Visit: http://www.3lduratec.com For info on ready to drop in 3L's and our supercharger kit. Last edited by Blackcoog; 06-22-2007 at 09:21 AM.

06-24-2007, 10:57 AM	#362 (permalink)
PREDATOR PLATINUM M0DERAT0R Join Date: Oct 2003 Location: SURPRISE! Posts: 5,289 Blog Entries: 1	Re: Interest in Supercharger setup This thing is sexy... and it will fit on an ATX! I'm still debating between doing an MTX swap and Nautilus Turbo, or leaving the car as an ATX and getting your S/C kit __________________ Add me to your friends list on MySpace

06-26-2007, 08:15 AM	#364 (permalink)
Blackcoog 3L Install Maestro Join Date: Oct 2000 Location: Minneapolis, MN Posts: 4,461	Re: Interest in Supercharger setup I was able to get a successful run in last night after getting everything back together and the idler seems to do it's job. I still have an alignment issue with the idler pulley as the belt slipped over one rib on the supercharger pulley. The idler bracket needs to be cut down another 1/8" which I should be able to get done today. edit: I just got it cut down so I can give it a try when I get home today to make sure it's all lined up correctly. __________________ Current Rides 1999 MTX Cougar, 3L Supercharged 325hp and 278tq 1999 SVT Contour, Ported 3L Visit: http://www.3lduratec.com For info on ready to drop in 3L's and our supercharger kit. Last edited by Blackcoog; 06-26-2007 at 09:59 AM.

06-26-2007, 12:16 PM	#365 (permalink)
LostRacer Guess who's pumpin!? :) Join Date: Apr 2002 Location: Everywhere you want to be Posts: 19,249 Blog Entries: 2	Re: Interest in Supercharger setup getting excited... __________________ The One&Only! C.A.R.B # FU50

06-26-2007, 01:34 PM	#366 (permalink)
cvsmightymouse24 NECO Member Join Date: Jul 2004 Location: Mechanicsburg Posts: 766	Re: Interest in Supercharger setup I need to change my pants!!! __________________ "I don't want a large Farva, I want a fricken liter of cola!!"

06-26-2007, 07:42 PM	#367 (permalink)
Blackcoog 3L Install Maestro Join Date: Oct 2000 Location: Minneapolis, MN Posts: 4,461	Re: Interest in Supercharger setup Woot car builds boost perfectly now! 10psi on my 3L is insane. I need to get some tuning to dial the air fuel in. I'll try and get a dyno tune setup for the car soon. __________________ Current Rides 1999 MTX Cougar, 3L Supercharged 325hp and 278tq 1999 SVT Contour, Ported 3L Visit: http://www.3lduratec.com For info on ready to drop in 3L's and our supercharger kit.

06-26-2007, 08:10 PM	#369 (permalink)
adam NECO Member Join Date: Jan 2007 Location: Gilbert Az Posts: 156	Re: Interest in Supercharger setup cant wait to see a vid!!!

06-29-2007, 07:40 AM	#370 (permalink)
Blackcoog 3L Install Maestro Join Date: Oct 2000 Location: Minneapolis, MN Posts: 4,461	Re: Interest in Supercharger setup FYI the stock SVT clutch will not hold 11psi of boost when shifting near redline.... I'm adding the intercooler back into the kit to lower intake temps and once I'm happy with the temps I'll get it dynoed. __________________ Current Rides 1999 MTX Cougar, 3L Supercharged 325hp and 278tq 1999 SVT Contour, Ported 3L Visit: http://www.3lduratec.com For info on ready to drop in 3L's and our supercharger kit. Last edited by Blackcoog; 06-29-2007 at 08:57 AM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode