Post your audio system!

[99orangecougar]

Ill get some updated pics of mine
jensen 7" touch screen head unit
polk audio 5 1/4 door
eminents 6" in the rear
kicker 15" l5 sub
mmats d100 sub amp
ma audio 600 mids and highs
also a 7"flip down screen
had to modifythe dash where the radio was to accomadate the jensen touch screen

[Puggsley456]

Originally Posted by Puggsley456

I dont have pics of mine yet but...

Eclipse CD7000 + Ipod Adapter
Rainbow CMX 265 Kick 6.5" Components in factory locations
Powered by a Phoenix Gold TI600.2(150x2@4ohm)
Elemental Designs 16Ov.2 In 2.3cubes @ 29hz
Powered by a USAmps Merlin MD.1D(1200x1@1ohm)

In my sealed trunk in my last car I did a 137db on the termlab with this gear. In a hatch I should do better.

Took a couple crappy pics with my phone last night...

[KUGAKRAZY]

Originally Posted by nsh50a

Here's a box I made 6 years ago right after I got my cougar. It was my first attempt at fiberglass and went well. If you use a 3/4" MDF baffle board for the front and then mold into the side cavity with attached chicken wire, you can put a layer of glass over the wire and then remove the wire and finish from the inside for a custom fit. I did fluid measurement (filling the box with water after completion) and the total volume supplied by this side is just around 0.7 cu ft. Fill it with fiber fill and get a low vol sub and your good to go. My main issue was that I needed to be able to haul an 8x10 bass guitar cab in the trunk which barely fits with the seats down (goes all the way to the drivers seat) and couldn't sacrifice any usable space. And yes, thats a thundercats logo, not cougar but I liked it better.

How do you change your tail lights? The first time I looked in the trunk of my car I thought of this exact same thing. BTW, the Tundercats logo is a winner, I also thought the same thing when I really looked at the Cougar logo real good.

great minds...

[deliveryguy]

For those of you using multiple amps - do your headunits support this or do you wire all of the amps (remote, output etc) in series?

I really like the setups of 1802 and NeverSatisfied - everyone is bumpin!

[iceberg65]

I have separate outputs for each amp, i like having full control of everything including crossover points from the headunit

[deliveryguy]

and Camlen I have the same subs!! I like them a lot - I like how you enclosed yours though.

[nsh50a]

No problem changing the lights. The box is secured by friction. It's a tight fit and I placed rubber shims around the top (behind where the carpet is tucked in) and it has stayed in place for the past 4 years without ever bumping loose.

[Saleen Cougar]

here is my system, work in progress

two 12"
400w amp
sony faceplate


still need to get:
capacitor
new speakers

[iceberg65]

looks great saleen, what kinda subs and amp are they? I love the box.

[Saleen Cougar]

insignia