PDA

View Full Version : WTB: Trunk Spring


Qdog002
08-15-2006, 10:22 PM
I am looking for the springs that pop the trunk up when you press the button to open the trunk. Currently, I only have one of the springs so someone has to be at the trunk when I press the button to initially "unhook" the trunk.

I am looking for one of the springs to install so trunk pops fully unhindges so that I can lift it without having to hold down the button.

thanks.

MOMO
08-16-2006, 04:31 PM
you dont have an aftermarket wings, do you?
because i thought it was my spring too until i found out that my aftermarket wing was too heavy for the spring to hold up.

just a thought.

CougarGuy939
08-16-2006, 04:39 PM
the spoiler has nothing to do with that but there is a fix for it somewhere on teamneco

MOMO
08-16-2006, 05:47 PM
the spoiler has nothing to do with that but there is a fix for it somewhere on teamneco

and you know this because?
and since my heavy spoiler will pop my trunk BACK every time i pop it, and it keeps it open when i take the spoiler off...

CougarGuy939
08-16-2006, 06:08 PM
check my cougardb i have a heavy spoiler as well but i had the same problem with the stock spoiler on there

MOMO
08-16-2006, 06:14 PM
im just telling you my experience, and i did not state that heavy spoiler was THE cause, just one of the possible cause. Dont just dismiss someones input just because you think its wrong.

CougarGuy939
08-16-2006, 06:19 PM
im not dimissing it at all i just offered up an alternate solution

Qdog002
08-19-2006, 08:11 PM
It was doing this with the stock spoiler too. I checked it out and I am missing the right spring. So with the trunk lid being so heavy and all, there is only one spring to pop it open. I dont know how I lost the other one, but I need one to compliment the other.

Qdog002
08-22-2006, 02:53 PM
Bump

Drewmanfu0
08-22-2006, 09:11 PM
The latch mechanism on the 01-02's was redesigned, they added a spring inside the latch to pop it past the locking mechanism. I would check about getting a new redesigned latch and your problems will be over. I have streched the springs till I was blue in the face and it never was "fixed".

Goldie
08-22-2006, 10:45 PM
The latch mechanism on the 01-02's was redesigned, they added a spring inside the latch to pop it past the locking mechanism. I would check about getting a new redesigned latch and your problems will be over. I have streched the springs till I was blue in the face and it never was "fixed".
really? ford parts list the latch the same for all years. :shrug:
also stronger gas shocks will help keep it from re-latching.

Drewmanfu0
08-23-2006, 04:48 PM
Same part but different revision. I'll take a picture of both when my 2001 gets out of the shop.


Search Engine Friendly URLs by vBSEO 3.2.0 RC5