Kinger
08-13-2006, 06:34 PM
I'm going to run a limited group buy on our heads to see of we can spark any interest and to help minmize the long delays in winter when most people want thier heads done.
Right now I will take 5 people for the oval to split port service for a total fee of $995 shipped back to you!
For those that know I never discount its just easier not to have different quotes flying around but for this limited time offer we will give 5 lucky people about a $240 discount!!
The serivce details are:
-- Complete disassembly of old valves/springs
-- Dunk tank bath in cleaning solution for a BRAND NEW appearance
-- Deck resurfaced if needed
-- Welding of center injector valleys
-- New injector valley cut in to match split port
-- Porting of intake and exhaust ports by hand
-- Porting of combustion chamber by hand
-- Dimples added for LIM gasket to drop into place like factory
-- Complete assembly of valves, springs, and retainers
-- 4 angle valve job on intake and 3 angle valve job on exhaust
-- Replacement of any guides not in excellent condition
-- Flow matching between all intake and exhaust ports to assure equal flow through each valve
-- Wrapped in shrink wrap to prevent foreign matter from entering cylinder heads
This will expire on Sept 15th or once i get 5 people and the service will go back to $1195 +$40 for shipping.
Payment can be made via paypal to jskinger28@hotmail.com and remember to add 3.5% so the total would be $1024.85
I have two sets of 'core' heads that I will get started on. The core program works with a $200 refundable deposit, I send the heads out and when I get yours back (only accept 3L oval port heads back) I'll refund the $200.
If you wish to buy the heads outright (aka no exchange just keeping your 3L heads), they are the same price at $200 additional to the $995
Expect turn around times around 2 weeks a set.
Communication is best by e-mail at jesse@pnpheads.com or a PM on this board.
Thanks for looking and hurry to get in on this and get the best heads you can for your baby!
Right now I will take 5 people for the oval to split port service for a total fee of $995 shipped back to you!
For those that know I never discount its just easier not to have different quotes flying around but for this limited time offer we will give 5 lucky people about a $240 discount!!
The serivce details are:
-- Complete disassembly of old valves/springs
-- Dunk tank bath in cleaning solution for a BRAND NEW appearance
-- Deck resurfaced if needed
-- Welding of center injector valleys
-- New injector valley cut in to match split port
-- Porting of intake and exhaust ports by hand
-- Porting of combustion chamber by hand
-- Dimples added for LIM gasket to drop into place like factory
-- Complete assembly of valves, springs, and retainers
-- 4 angle valve job on intake and 3 angle valve job on exhaust
-- Replacement of any guides not in excellent condition
-- Flow matching between all intake and exhaust ports to assure equal flow through each valve
-- Wrapped in shrink wrap to prevent foreign matter from entering cylinder heads
This will expire on Sept 15th or once i get 5 people and the service will go back to $1195 +$40 for shipping.
Payment can be made via paypal to jskinger28@hotmail.com and remember to add 3.5% so the total would be $1024.85
I have two sets of 'core' heads that I will get started on. The core program works with a $200 refundable deposit, I send the heads out and when I get yours back (only accept 3L oval port heads back) I'll refund the $200.
If you wish to buy the heads outright (aka no exchange just keeping your 3L heads), they are the same price at $200 additional to the $995
Expect turn around times around 2 weeks a set.
Communication is best by e-mail at jesse@pnpheads.com or a PM on this board.
Thanks for looking and hurry to get in on this and get the best heads you can for your baby!