View Full Version : Deviously Ghetto Garage Sale
DEVIOUSDEV
06-28-2006, 03:27 AM
I've got a whole bunch of stuff in my garage.
And it all needs to go.
Stuff like Used Ground Controls (http://web.mac.com/deviousdev/iWeb/For%20Sale/Ground%20Controls.html) - $100 Shipped
All the stuff you could need to do an MTX to ATX Conversion (http://web.mac.com/deviousdev/iWeb/For%20Sale/MTX-ATX%20Conversion.html) - $ Various.
A Sweet OBX AfterMarket ATX Shift knob (http://web.mac.com/deviousdev/iWeb/For%20Sale/MTX-ATX%20Conversion.html) - $35 Shipped.
An empty MTX-75 Case (http://web.mac.com/deviousdev/iWeb/For%20Sale/Tranny%20Case.html) (perfect for powdercoating) - $75 + Shipping.
A 0-Miles stock Differential (http://web.mac.com/deviousdev/iWeb/For%20Sale/MTX%20Differential.html) - $130 Shipped.
A Weapon R Intake - SOLD
A used Rack and Pinion Steering Gear (http://web.mac.com/deviousdev/iWeb/For%20Sale/Rack%20and%20Pinion.html) - $75 Shipped.
And Various Contique (http://web.mac.com/deviousdev/iWeb/For%20Sale/Contique.html) and Cougar Parts (http://web.mac.com/deviousdev/iWeb/For%20Sale/Various.html) - $ Various.
Check the links for specific details and prices (I'll knock the shipping prices off of each item for people who are close enough to pick stuff up)
Remember, while Dibs are a delicious treat...
http://web.mac.com/deviousdev/iWeb/For%20Sale/Intro_files/dibs.png
By offering them to me in a PM, Post, or email
You will not be guaranteed one of these items. :crazy:
You must pay me for that privilege.
No bribes.
DEVIOUSDEV
06-28-2006, 03:40 AM
PM me, or post any questions here.
I will be happy to answer any, and all, of them :)
And I accept PayPal, Cash, Check, and potential trades...
But again, you cannot pay me in dibs :crazy:
tr0nic
06-28-2006, 10:00 AM
Dibs on the gc's
kaminaricoug
06-28-2006, 11:04 AM
second dibs on gc's if not taken by tronic
solo12181
06-28-2006, 02:04 PM
do u have the little white shift rod from your atx because i broke one :mad: :banghead: and need to replace it
tr0nic
06-28-2006, 02:43 PM
Okay I didn't read it all completely... i'm going to pass on the gc's - they are a little too worn out for what I need them for.
mtx to atx conversion?
i doubt too many people are going to line up for that
unless that's a typo??
DEVIOUSDEV
06-28-2006, 09:33 PM
mtx to atx conversion?
i doubt too many people are going to line up for that
unless that's a typo??
You didn't click the link, did you? ;)
DEVIOUSDEV
06-28-2006, 09:46 PM
do u have the little white shift rod from your atx because i broke one :mad: :banghead: and need to replace it
I'd prefer to keep those pieces together... because it would be pretty hard for me to sell the whole assembly with that piece missing ;)
But, what I suggest you do is go to a local craft or hardware store, and buy a wooden dowel that is the same diameter, and then cut it to the correct length. Problem solved for $1.98 :)
Bic Pens are also the same diameter... they're not as long, but if you were cutting your shifter down anyway, that might suit your needs.
Drewmanfu0
06-28-2006, 10:09 PM
second dibs on gc's if kaminaricoug doesn't buy them.
kaminaricoug
06-29-2006, 10:32 AM
I will have to let my dibs go on the Gc's i got koni's and these are for the stock/Bilstien i belive. So they can go to the dibs below me.
solo12181
06-29-2006, 02:36 PM
thanks devious:biggrin:
DEVIOUSDEV
07-03-2006, 02:47 AM
Like B2K, this thread goes Bump Bump Bump :ugh:
Still some stuff available... get it before it's gone.
MercCoug99
07-03-2006, 03:00 AM
how easy is it to take the tanny internals out of the old and put in the new? im just wondering because i broke the ears off mine for the mount so the tranny is help up by 1 and a half bolts. not too safe so i might be interesed if its easy.
DEVIOUSDEV
07-03-2006, 05:37 AM
I haven't personally done it, so I'm not positive... but I've heard that it is not something you would want to do if you haven't had any experience doing that sort of thing before.
With the internals of something as vital as the transmission, I tend to defer to the expertise of local professionals.
But when I was searching around, I was quoted $250 for swapping the case and installing a Torsen into my transmission. So you might be able to find a better deal in your area?
Comando489
08-26-2006, 05:04 PM
for the ATX shift knob, when you remove the stock do you have to make a new button for overdrive or how does that work?
also how do you take off the stock shift knob?
02coug
08-26-2006, 09:02 PM
possibly interested in the aftermarket shift knob.... could you possible send me another pic at a different angle so i can see it better? I have cash in hand if it's what I'm looking for.
TrackCat
08-27-2006, 12:33 PM
dibs on the stock dif.
TrackCat
08-27-2006, 03:12 PM
how long would it take to send the stock diff. once payment is sent??
DEVIOUSDEV
08-28-2006, 01:03 AM
possibly interested in the aftermarket shift knob.... could you possible send me another pic at a different angle so i can see it better? I have cash in hand if it's what I'm looking for.
There aren't many more angles you can take pictures of this thing, since it is symmetrical, but here's a view from the "top"
http://www.newcougar.org/forums/attachment.php?attachmentid=26080&stc=1&d=1156738144
DEVIOUSDEV
08-28-2006, 01:07 AM
how long would it take to send the stock diff. once payment is sent??
It depends on when I receive payment.
At the latest, assuming I had money in hand by this week, stuff could ship by Saturday. If you need it quicker, and can get me the money quicker, I can rearrange my schedule to ship on Wednesday morning.
DEVIOUSDEV
08-28-2006, 01:11 AM
for the ATX shift knob, when you remove the stock do you have to make a new button for overdrive or how does that work?
also how do you take off the stock shift knob?
To take it off, you have to lift up the shifter surround piece. Reach in there and disconnect the two wires coming out of the stock shift knob. Then pull straight up on the knob.
Then, to install an aftermarket one like this, you'd have to rewire the overdrive button to work somewhere else.