View Full Version : FS 65MM Throttle Body
Asymmetric
06-11-2006, 06:48 PM
FS is a 65MM TB (same size as SVT, similar styling, but requires modification that I was not in the mood to do.
$100 OBO :)
fordrule
06-12-2006, 12:01 AM
is this the mustang tb?
Frosty
06-12-2006, 12:02 AM
What modifications need to be done? That might help your sale.
J-Man
06-12-2006, 12:02 AM
SVT contour throttle body is only 60mm.
Tygerr
06-12-2006, 02:52 AM
SVT contour throttle body is only 60mm.
Ha! I knew it was only 60mm!
Regardless, it's a Mustang throttle body. I'm pretty sure you just modify the mount, you could do a search. Most people end up modifying the svt bracket because it fits wrong anyhow.
Asymmetric
06-12-2006, 01:48 PM
Hrm, I was just going off what Andy told me :) Anyways yes, you just have to modify the bracket mount for it to work. Not too hard from what I understand, im just lazy as all hell :)
RodneyBur
06-12-2006, 02:23 PM
I have both and you need both to make the GT TB to work. Basically you remove the end from the TB shaft off the SVT and bolt / weld it on the shaft from the GT TB. It then mounts directly as the SVT TB would. The GT TB has different connectors for the speedo and cruise control cables that is why you need the shaft end from a SVT. People have used the whole shaft from the SVT but it is said to be to short and could cause problems with the TPS.
The SVT / GT TB opens differently than stock 2.5 TB so you cannot use the shaft ends from a stock TB.
Plently of info on CEG with pictures on the subject. I'm hoping to find a way of converting the GT TB without wrecking an SVT TB, but haven't had time to look into with my engine issues.
GL.
GrandMasterKhan
06-12-2006, 03:19 PM
what about using a 3.0 throttle body instead of the svt?
StealthyWeasel
06-12-2006, 03:46 PM
I was wondering the same thing, considering my 3.0 has a 60mm metal tb.. isn't that the exact same as the svt and w/ a split port setup it needs the svt bracket to mount right up?
B3NN3TT
06-12-2006, 03:49 PM
the 3.0 and the SVT are the same casting, with minor differences. I think they are totally interchangeable
Asymmetric
06-12-2006, 04:34 PM
soooo, anyone want this thing :) It's taking up all of 6" of closet space :)
Asymmetric
06-13-2006, 02:17 PM
ttt
Asymmetric
06-19-2006, 10:07 PM
ttt again :(
fordrule
06-22-2006, 05:45 AM
ur asking jinda hi for this. found one on ebay for a lot cheaper. just fyi
Asymmetric
06-22-2006, 03:45 PM
meh~I was just going off what a couple people told me~so yeah~anyone who is considering just give me a reasonable offer and its yours