View Full Version : Wiring Nitrous
S3c70r
06-10-2006, 06:17 PM
So I got my nitrous kit installed... Got my fuel pressure safety switch.. Just need to hook it up.. I believe this would go between the fuel rail and the fuel pressure regulator... thats what I read...
And I just ordered the BMN Nitrous Controller.
http://www.bmnracetech.com/products.html
Im almost done.. I just have to wire everything ...including ZEX NMU.
The TPS wire is hooked up.. I have no clue how Im going to wire the red positive wire of the ZEX NMU. Directly to the battery ?? Or should I go with the fuse box ?? or with the ACC ON wire ?? I have to wire the ZEX NMU and the bottle heater. Im pretty sure I would have to upgarde a fuse somewhere too.. but which one ? The best setup would be that when I got my key in the ACC ON Position then I can arm and heat the bottler.. otherwise it wont do anything... Can I hook up both positive wires to the ACC ON wire with a T split...
Im asking because I dont feel like burning in my own car ..
S3c70r
06-10-2006, 06:30 PM
Got my answer here...
http://www.fordpower.net/forums/showthread.php?t=137353
What they want you to do is to get a 12V source from a point that only comes on when the ignition key is on
This is what Ive been looking for ... where is this wire ;)
hmm... i thought this nitrous install was as easy as "changing oil"??
diddy
06-11-2006, 11:13 AM
hmm... i thought this nitrous install was as easy as "changing oil"??
:rofl: :rofl: :rofl: this install has taken like 3 weeks. can we unban nemesis just so he can come in and flame this guy? :rofl: :rofl: :rofl:
FastCougar
06-11-2006, 04:52 PM
It took me a few days the first time. When I sold the kit to ElCid98, I installed it for him in a few hours (3-4) IIRC.
S3c70r
06-13-2006, 01:12 AM
install took a couple of hours... didnt include the electric part.. just done my custom switch box. I dont want to make any holes in my interior. Install was done in less than 4 hours.. without the electrical part ...whats ure problem buffdaddy ?
install took a couple of hours... didnt include the electric part.. just done my custom switch box. I dont want to make any holes in my interior. Install was done in less than 4 hours.. without the electrical part ...whats ure problem buffdaddy ?
he doesnt have a problem.
on your other thread, you said that installin nitrous was as easy as "changing your oil".
but from all the threads you start about it and all the questions, obviously you are mistaken about the "ease" of installing a nitrous kit.
diddy
06-15-2006, 05:15 PM
he doesnt have a problem.
on your other thread, you said that installin nitrous was as easy as "changing your oil".
but from all the threads you start about it and all the questions, obviously you are mistaken about the "ease" of installing a nitrous kit.
thank you sir
ilovemycar
06-29-2006, 02:03 PM
s3c70r...here is an excel spreadsheet that i used to hook up my BMN controller. I hooked it up to the instrument cluster tach signal wire. It is pin number 7 on the "black" side of the cluster. You will know what i am talking about when you take the cluster out. The wire is White/Black. If you want to hook it to the wire that goes directly to the PCM you can look on that spreadsheet. At the bottom of the sheet there are tabs for each individual part of the cars electrical system. You can thank puckpuck for the wiring diagram...i found it in one of his posts a long time ago lol.
And i'm bout to send you a PM back too...
ilovemycar
06-29-2006, 02:06 PM
s3c70r...here is an excel spreadsheet that i used to hook up my BMN controller. I hooked it up to the instrument cluster tach signal wire. It is pin number 7 on the "black" side of the cluster. You will know what i am talking about when you take the cluster out. The wire is White/Black. If you want to hook it to the wire that goes directly to the PCM you can look on that spreadsheet. At the bottom of the sheet there are tabs for each individual part of the cars electrical system. You can thank puckpuck for the wiring diagram...i found it in one of his posts a long time ago lol.
And i'm bout to send you a PM back too...
EDIT: ok it won't let me attach the Excel Spreadsheet for some reason so i will see what i can do later.
mond12345
06-29-2006, 02:19 PM
You can attach it as an attachment to your post. :)
S3c70r
06-29-2006, 05:43 PM
Excellent spreadsheet ... helped a lot ... Ill be finishing the wiring this week end... Long week end for us .. canada's day :biggrin:
Ill be making some tests... my bottle is full of nawss... I just need some good luck with the plastic gromet behind the cruise control modulator ? controler ? whatever it is .. to pass wires and the stainless steel braided line from my super autometer mechanical n2o gauge....
Ill post an update soon to lets you know how's my kitty going..
ilovemycar
06-29-2006, 06:27 PM
You can attach it as an attachment to your post. :)
I know that that's what i tried to do...but for some reason it wouldn't let me. :confused:
LostRacer
06-29-2006, 06:58 PM
You minds sending me that spreadsheet as well? I may install mine by the end of summer...
S3c70r
07-23-2006, 01:23 AM
If anybody needs help to wire his nitrous setup with ZEX, FPSS and a Window switch.. Here's the wiring diagram I use in my Cougar !
25578