PDA

View Full Version : FS: 3L Powertrain Parts [Updated]


Massiv
01-12-2006, 03:24 PM
*** Updated Jan 23/06 ***

Parts are located in Toronto, Ontario (http://maps.google.com/maps?f=q&hl=en&q=1+Yonge+Street,+Toronto,+Ontario&btnG=Search&ll=42.690511,-79.112549&spn=5.636181,13.886719).

Here's an incredible opportunity for anyone considering a 3L. I have a 3L engine (and parts) available and ready to go. This was built by me for another member on here, and unfortunately due to a car accident (not that member's fault), this essentially brand new engine is now available. All parts have less than 200 miles on them.

Here are the specs:

2004 Escape-based full oval-port P&P 3L: CAD$4200/USD$3500
-2004 Escape block
-Clevite Rod bearings
-SVT Cams
-Ported and Polished Oval Port 3L heads (with CC work)
-24lbs returnless injectors
-SVT LIM
-SVT UIM
-SVT TB
-Red Ford Racing wires


SPEC Clutch/Flywheel: CAD$750/USD$620
-SPEC Stage 1 Clutch
-SPEC Aluminum Flywheel


This engine is newly assembled, with all brand-new bolts and seals as necessary during the build process. The setup has less than 200 miles on it, and is not even out of break-in period. If you want more than one of these, (i.e. you want the engine and the spec parts together), let me know and we'll make a deal.

Massiv.

CougarBum
01-12-2006, 03:38 PM
pm....

1phatxr7
01-12-2006, 03:54 PM
what is an est. quarter mile time for a build up like this?

Massiv
01-12-2006, 04:04 PM
Hmm... With a very good driver, I would suggest a high 13, low 14. My build is different from this one (hybrid), so my performance is not directly comparable. I have beaten S2000's, a G35, etc etc... Again, this setup is different, and in the brief time it ran, it was being babied for the break-in period, so I can't really compare. It's a pretty standard build... guys in the 3L forum would probably know.

Massiv.

MaverickFlyer
01-13-2006, 01:50 PM
Thread cleaned up, Debate was moved to New "3L Debate thread"

Lets keep this thread just for Massiv! ;)

Massiv
01-16-2006, 02:38 PM
Going to sweeten the deal here. I'll throw in a set of basically brand new MSDS Headers and Y pipe with the extreme coating on them. Now, this is truly a complete drop-in package to take your stock cougar to serious new highs.

Massiv.

cougarprophet
01-16-2006, 07:01 PM
if i had the money..and a 2.5 it would be sold....damn u college

Massiv
01-23-2006, 01:37 PM
Post updated...

michcougar
01-23-2006, 10:39 PM
pmd with offer on headers.


Search Engine Friendly URLs by vBSEO 3.2.0 RC5