Aftermarket Steering Wheel

[XplosivePlushToy]

I just picked up an aftermarket steering wheel and was wondering where I could get an adaptor hub for it. I found a universal one on Andys but I was wondering if there were any alternatives to that. Thanks.

(I did perform a search on the topic and turned up no results)

[jaged]

im pretty sure the focus adaptor bolts right up

[BigBalledOX]

I'd dig it up for ya, but I gotta run. Punch in Momo in the search box and it should give you a ton of information about 'em, I was just looking in to this last night.

[XplosivePlushToy]

Awesome. Thanks guys.

[Y2Kat]

Here's the adapter ya need
http://www.shopmomo.com/4538.html

it will bolt right up after you trim the sterring wheel shroud plastic a bit.
I did the install myself...pretty simple and straight forward

[XplosivePlushToy]

Steering wheel just arrived, its not a Momo BTW. Will the Momo hub work on the Netami steering wheel?

[BigBalledOX]

Not to be a dick, but shouldn't you have checked that first?

[Funkboy316]

Steering wheel just arrived, its not a Momo BTW. Will the Momo hub work on the Netami steering wheel?

i just checked out the natami wheels on ebay for you. it will work with a momo hub. 6 hole hub momo, sparco, etc. i believe they are 6 hole X 2 7/8 (between holes) but it may be 6 hole X 2 3/4 if you want to double check your wheel

some other hubs are 8 hole and dont work but you should be golden with a momo hub

[Y2Kat]

You might have to use some spacers to get the adapter to tighten up...at least I did.
I think you'll be fine. Test fit the wheel to the adapter before you tear into the car just ot be on the safe side.

[hotcat]

Yes, that wheel will fit. Thats the same brand I have on my car. I also had to use a washer like Y2Kat did plus modding other parts of the hub to make it fit right.

[MOMO]

i think netami, momo, nardi, grant, simone racing all have the same bolt pattern.
if you want the turn signal to work, you will need to do some modding of the acutal adaptor itself. (dremel required).

[XplosivePlushToy]

Thanks! And yes Bbox, I should have but ah well. Too late for that eh? Hotcat, that is almost identical to the one I bought, same seats I was looking at getting too. Haha. And as for the turn signal, I have the dremel already, handy little thing I must say. Thanks for the help all.

EDIT: Your interior looks almost identical to how I was trying to get mine to look HotCat, although, different color of course, probably just silver and black.