View Full Version : a dyno in norwalk
Gebby
01-10-2006, 03:02 PM
if anyone was looking for a dyno there is one in norwalk.
www.crt-performance.com
they do have group rates if anyone wants to get there car dynoed this spring i will check with them on prices for group rates.
don
gyger
01-10-2006, 08:21 PM
if anyone was looking for a dyno there is one in norwalk.
www.crt-performance.com
they do have group rates if anyone wants to get there car dynoed this spring i will check with them on prices for group rates.
don
Good find Don!
I would roll out there but I got Backstreet Performance (http://www.backstreetper.com/) 5 minutes from my house and the last time they tuned me I was there for 2.5hrs and they charged me $50 plus they let me work on my ride there if I need to for free.
Pyro81
01-11-2006, 10:44 AM
If anybody was wondering CRT is the same place that Greg is going to for his dyno runs and so forth.
Not a bad looking place if you ask me. Their store area is a bit small. But they have two garage bays and one of them has a lift (not the kind you drive onto). Their dyno is in the floor and is in a room behind the garage bay. I met a couple people that work there and they were pretty cool. I might take my car up there sometime to get a baseline for future engine mods.
Greg, wanna chime in with some prices?
Tygerr
01-11-2006, 06:15 PM
How far is Norwalk from C-bus? Sounds good, they even sell SCT chips. I'd like to get a base dyno done for gits and shiggles.
B3NN3TT
01-11-2006, 07:18 PM
How far is Norwalk from C-bus? Sounds good, they even sell SCT chips. I'd like to get a base dyno done for gits and shiggles.
Norwalk is pretty much ON THE LAKE. It is practically adjacent to Cedar Point in Sandusky. 2 hour drive.
DROPdatSCORT
01-11-2006, 11:16 PM
its about a 2 hour 2 15 min drive
DROPdatSCORT
01-11-2006, 11:17 PM
o and for priceing it went up a bit 115/hr for dynotime
i think 75 for 2 pulls with AFR readings
Tygerr
01-12-2006, 09:07 PM
That's a lot of money. 115/hr OR 75/hr for 2 pulls? I'm confused.
Gebby
01-12-2006, 09:24 PM
in one hour unlimited pulls for $115 or 2 pulls for $75.
the $115 is a much better deal. last time i was there i got 5 pulls but that was at $100 per hr.
i will be going again by the end of the month if anyone wants to go with me.
i'm getting the xcal2 and all the tunning. should be fun!
DROPdatSCORT
01-12-2006, 10:39 PM
115/hr is for tuning 75 an for 2 pulls is pulls only no tuning and ect.
gyger
01-13-2006, 03:02 PM
in one hour unlimited pulls for $115 or 2 pulls for $75.
the $115 is a much better deal. last time i was there i got 5 pulls but that was at $100 per hr.
i will be going again by the end of the month if anyone wants to go with me.
i'm getting the xcal2 and all the tunning. should be fun!
what's the xcal2?
what numbers did you put down Don?
LinkMan
01-13-2006, 04:39 PM
what's the xcal2?
SCT's XCalibrator 2 user adjustable OBD-II flash tool. A lot of Ford tuners swear by it. I first heard about it on the Contour boards.
Check it out here...
http://www.sctflash.com/product_xc2.php