PDA

View Full Version : Some Quick help needed.


02cougarxr
07-09-2005, 03:50 PM
I'm dropping my car off tomorrow to have the springs installed and want to make sure that I am good to go. I have an 02 XR and bought a set of intrax springs. I also bought the 99-00 spring seat back AKA the rear strut mount. Do I tell the guy to just replace the strut mounts with the old one, reuse everything else, and use the 99-00 intrax springs.

Is there anything else that I'm missing? Please Help

frenchblueC2
07-09-2005, 10:58 PM
you should be good to go with that.
When I had my eibachs/ST200's installed, I also gave them the rear upper strut mounts for 99-00, like you.
When they took my fronts off, the upper strut mounts crumbled apart, so they had to order some of those as well.
My car had only driven through one winter too. custom_images/emoticons/shocked.gif

SassyCat2002
07-10-2005, 08:41 AM
Originally posted by: 02cougarxr
I'm dropping my car off tomorrow to have the springs installed and want to make sure that I am good to go. I have an 02 XR and bought a set of intrax springs. I also bought the 99-00 spring seat back AKA the rear strut mount. Do I tell the guy to just replace the strut mounts with the old one, reuse everything else, and use the 99-00 intrax springs.

Is there anything else that I'm missing? Please Help

I hope your not paying alot for this install. There are alot of us that can do this for a 12 pack.....hehehehehe

Ron:smoke-t:

02cougarxr
07-11-2005, 01:29 AM
I just don't really have the time to get this done any other way, I like the fact that I can drop it off in the morning and come back at 2 and have a lowered car. Well worth the couple bills that it'll cost. I'll post pics when all is done tomorrow.


Search Engine Friendly URLs by vBSEO 3.2.0 RC5