PDA

View Full Version : stock front needed


Jorgen
05-26-2005, 09:20 PM
anyone have one locally or know of one locally in a junk yard in good enoguh condition to just need very minor work if any and a spray to go on my car..

EternalOne
05-27-2005, 01:30 AM
I got a 99 front, silver -- I think it has a crack on one part, but otherwise its ok. Has fogs too, someplace. If ya can use it, its yers.

E1

Zalec
05-27-2005, 03:36 AM
Originally posted by: Jorgen
anyone have one locally or know of one locally in a junk yard in good enoguh condition to just need very minor work if any and a spray to go on my car..

i think the more important question to ask here is what did you hit? and :needpics:

Excelcier
05-27-2005, 10:17 AM
I'll happily give you mine in exchange for a nice aftermarket one! :biggrin:

Jorgen
05-27-2005, 03:01 PM
E1 if you have it and doesn't have a crack in it i woudl forsure be interested in taking it.. I have two with cracks right now but don't think they are repairable on a uerethane bumper...

you probably know more than i do about the repaiign of cracks if you think it is repair able i woudl probably be interested in picking it up from you...



and Zack... tapped the guard around a gas pump on a bad weahter day about a year and a half ago which is what caused me to lose the car for insurance reasons for a year and a half so now that it is back i need me a new front bumper...

Ron I could go aftermarket too but just don't really like very many of them...

EternalOne
05-27-2005, 03:28 PM
The only problem with my front is that prior to me buying the car they hit something and it caused a bend near the right-front lower portion. They fixed it by putting some sort of epoxy on the back (they rigged it). Then about 2 yrs ago right after picking up the Coug I was going down the highway and someone dropped a 50lb bag of salt in front of me, which I proceeded to run directly over. :smoke-g: When we removed the front, I believe it cracked along that bend, but I'll have to 2x check for ya. I forgot last nite (got into a good crew on Matrix Online) -- so I'll check tonite when I get home.

E1

Jorgen
05-27-2005, 03:40 PM
Originally posted by: EternalOne
The only problem with my front is that prior to me buying the car they hit something and it caused a bend near the right-front lower portion. They fixed it by putting some sort of epoxy on the back (they rigged it). Then about 2 yrs ago right after picking up the Coug I was going down the highway and someone dropped a 50lb bag of salt in front of me, which I proceeded to run directly over. :smoke-g: When we removed the front, I believe it cracked along that bend, but I'll have to 2x check for ya. I forgot last nite (got into a good crew on Matrix Online) -- so I'll check tonite when I get home.

E1

thanx man.. i woudl ne interested in it... just really sick of driving around with a crack in my front bumper and everyone who I ahve tried to buy one from has backed out or been a flake...

EternalOne
05-27-2005, 05:20 PM
LOL. Well mines been sitting in the shed for a year now, and its just taking up space. If you can use it, you can HAVE it. I have no use for it any more. Hell, the fogs and all are yours if ya want em, too. (I even have PIAA's for the fogs.)

E1

ClaymoreWW
05-27-2005, 07:46 PM
man...

Jorgen, if you have no use for some of those items, I am in need. I have a fog that has the mounting tab broken, so it flops around. In addition, the little door that covers that mounting screw is gone and one of the lower grille pieces has a hole. I am in Battle Creek, but road trips work ;)

- george

Jorgen
06-03-2005, 02:23 PM
well looks like i need the black plastic piece that goes between the bumper and the rad support since that got busted off this past weekend on 75 when i hit what I assume was a retread off a semi.. so anyone have one let me know...

EternalOne
06-03-2005, 02:50 PM
Hey man, sorry I forgot to post. I checked the bumper out and it does have a crack in it, not really sure if its fixable or not. The crack is on the lower-passengers side, and is about 4-6 inches. I have all of the other parts tho, if you still wanted those, or even if ya still wanted the bumper...

E1

Jorgen
06-03-2005, 03:15 PM
I've got a full set of basicly brand new lower mesh and some nice fogs so I don't really need those... Thanx alot for checking that out for me to see if the bumper was cracked... If you happen to have that lower tray between the bumper and the rad for a stock bumepr I woudl be interested in that.

ClaymoreWW
06-04-2005, 09:19 PM
A big thanks to Eternal for the fogs and the lower grille piece I needed. I drove over there this morning and got them and had a nice chat about our Cougars. Thanks again!

- george

daveicp
06-05-2005, 05:14 PM
i have a stock front bumper i could get rid of im from canada though lemme know its black an 99

EternalOne
06-06-2005, 10:03 AM
No problem, Claymore! We also went to the shed and checked the front, he can tell ya that there is a nice crack in it, so I doubt its of use to anyone. Prob just get it hauled away when I clean the shed out next week...

And btw, Claymore has one of the cleanest stock paintjobs I've seen in awhile. Very well cared for car! :thumbsup:

E1


Search Engine Friendly URLs by vBSEO 3.2.0 RC5