View Full Version : Where to pull codes...
Deimar
05-17-2005, 07:26 PM
Just wondering if someone could let me know if there's a place I could/should go to in the GTA to get my Coug's ODBII codes, other than the dealership. Got an engine light today and my usual DTC 9201 was replaced with 9318. But I guess to make sure it is the alternator or the battery (which is still showing 14 in the self-diagnostics) I might as well pull all the codes and see if anything else is wrong.
Would appreciate any info. Thanks.
rastaman
05-17-2005, 10:59 PM
if you are near the markham area in the evenings, or near downtown during the day i can pull the code for you...
Deimar
05-17-2005, 11:40 PM
I live near hwy7 and 404, but I can drive to wherever u are.....evenings are better for me, plus I am off work this Fri, Sat, Sun and Mon.....I will really appreciate it.....Let me know
rastaman
05-18-2005, 09:13 AM
this weekend is a little hectic for me because i have a wedding to go to, but i should be able to find some time....PM me your cell phone number and i'll give u a call if i manage to free up some time....
Deimar
05-18-2005, 04:59 PM
PM'd
timeless420
05-18-2005, 05:10 PM
I'm around this weekend and I have a scanner. I'll be putting my engine together and in but if you drop by I'll see what I can do. I can always use an extra set of hands when it comes to dropping the engine back in too anyways.
BTW. I'm at Bayview & 407
MaverickFlyer
05-18-2005, 06:38 PM
I'm at Bayview & Aurora Road but I won't be around this weekend Sorry. See everyone lives so close we should have more Mod meets or cruise Nights? :shrug:
Originally posted by: MaverickFlyer
I'm at Bayview & Aurora Road but I won't be around this weekend Sorry. See everyone lives so close we should have more Mod meets or cruise Nights? :shrug:
Relax man. Its only the middle of May. The weather has been crappy until now. When summer finally rolls around, we'll have plenty of meets. Not too worry. :)
Mike
Deimar
05-19-2005, 12:35 AM
Thanks Evan. I might take u up on your offer if Ajay doesn't call me. And no problem I'll be glad to help, just let me know when, so I'm free.
As for the Cruise Nights, that actually sounds pretty good. I enjoyed the drive at last years CanAm and think it would be pretty cool to drive around T.O. after dark.
timeless420
05-27-2005, 12:50 AM
Try me again this weekend. Car is up and running again for the time being. Just have to work out issues with a few more parts before I'm back at it
Housecat
05-27-2005, 03:26 PM
Watch out.....
Pulling codes only gives you a general area where the problem exists, it won't tell you the root cause.
MaverickFlyer
05-27-2005, 03:44 PM
Originally posted by: Housecat
Watch out.....
Pulling codes only gives you a general area where the problem exists, it won't tell you the root cause.
True but at least its a starting point! ;)
Deimar
06-09-2005, 01:01 AM
well......since everyone seems busy I might as well "borrow" a scanner from Canadian Tire and do it myself.......could someone please tell me where the plug/socket for the scanner is......will appreciate it....
MaverickFlyer
06-09-2005, 01:23 AM
Its under the dash left of the steering wheel. I f you come to Can-Am on Sunday, I'll bring my scanner!;)
Deimar
06-09-2005, 02:11 AM
Yeah I thought so....tnx MaverickFlyer.....I'll do my best to come to Can-Am.....it's on June 12 at 10:45, right??
MaverickFlyer
06-09-2005, 11:57 AM
Originally posted by: Deimar
Yeah I thought so....tnx MaverickFlyer.....I'll do my best to come to Can-Am.....it's on June 12 at 10:45, right??
10:00AM Meet in Ft. Erie at Mather Arch
10:45AM Cruise up to Queenston Heights Park
11:30-? Eat and Hang Out at the Park
http://www.geocities.com/canamcruise/