Sidemirror Switch & Motor

[atlas]

Okay, I've got a dilemma. I am planning to put a screen, fiberglassed/molded, into the classic spot on the dash cowl. The only difference is that I was going to put the screen on a sidemirror motor and attach it to a switch. This would enable the screen to pivot from side-to-side, up and down to get the best view whereever you may be sitting. I got a secondhand switch from someone on here, and when I looked at it, I became perplexed. The switch is a plugin. How would you suppose I wire this plugin to the sidemirror inorder to make it control the screen and swivel around? I really need to figure this out because the dash cowl is already fiberglassed for this reason.

Thanks for any thoughts,
Darrell.

[jervyatmsu]

couldnt u jsut run the wires from switch to the motor with the mirror plate still on then put your monitor on that
just a suggestion

[Z3BlackCat2]

no offence man, but if you cant figure that out on your own, maybe you should take it somewhere to get it fixed. the controls on that motor are really simple, really.

[atlas]

Originally posted by: Z3BlackCat2
no offence man, but if you cant figure that out on your own, maybe you should take it somewhere to get it fixed. the controls on that motor are really simple, really.

Well, if it's so simple, mind telling me what the pins 1 through 7 on the back of the switch each do? I mean, if it's so simple and all....