GrandMasterKhan
04-04-2004, 11:39 PM
I hope to bring the best to NECO and here it is again! Let me know what you all think. I have tested this new intake on several cougars and it peforms great, and its much easier to install. I can install one in about 1 hour or so.
I have revised the GMK CAI design for a more precise install and due to feedback from prior customers. These revisions should address any prior issues with the GMK CAI install and pipe separation associated with clamps shaken loose during race conditions. Don't settle for a cheap knock-off Cold Air Intakes, Get the real deal directly through me.
-Mounting Bracket: to prevent CAI movement during shifts.
-Relocated the nip lower on the pipe section. No longer on the upper bend, so it cannot be seen by those who don't need to use it.
-Changed piping bends to allow more accurate install.
-Optional Colors: Blue, Red, Gunmetal
-Carbon Fiber will be available in occasional Group Buys only. TBA
-Full GMK CAI install pictorial available online.
-3" Polished Aluminum Piping W/Black Couplers
All new GMK extensions will be made specifically for each customer. Made custom to fit with whatever shortram you have. No matter if it is custom or name brand. V6 or Zetec. MTX or ATX.
Pricing for the GMK CAI is as follows: no extra parts to buy!
Extension: $90
Full System: $150
Colors: $12 - Heat resistant to 500degrees
3.5"x3" Reducer: $15
The GMK CAI has been installed and proven on the following makes and models:
Cougar/Contour I4 & V6
SVT Contour V6
mondeo I4 & V6
Cougar/Contour 3.0hybrid
Cougar/Contour 3.0
OBDII scan tool test results:
80 degree ambient temature. 8pm as tested at CougarFest 2k3
GMK CAI: 55mph 78degrees ......Idle 5mins: 82 degrees
Shortram: 55mph 120 degress....Idle 5mins: 162 degress
Here is an Image of the GMK CAI 2 installed. Enjoy!
http://www.fastcougar.com/forums/attachments/GMK2%2Ejpg
I have revised the GMK CAI design for a more precise install and due to feedback from prior customers. These revisions should address any prior issues with the GMK CAI install and pipe separation associated with clamps shaken loose during race conditions. Don't settle for a cheap knock-off Cold Air Intakes, Get the real deal directly through me.
-Mounting Bracket: to prevent CAI movement during shifts.
-Relocated the nip lower on the pipe section. No longer on the upper bend, so it cannot be seen by those who don't need to use it.
-Changed piping bends to allow more accurate install.
-Optional Colors: Blue, Red, Gunmetal
-Carbon Fiber will be available in occasional Group Buys only. TBA
-Full GMK CAI install pictorial available online.
-3" Polished Aluminum Piping W/Black Couplers
All new GMK extensions will be made specifically for each customer. Made custom to fit with whatever shortram you have. No matter if it is custom or name brand. V6 or Zetec. MTX or ATX.
Pricing for the GMK CAI is as follows: no extra parts to buy!
Extension: $90
Full System: $150
Colors: $12 - Heat resistant to 500degrees
3.5"x3" Reducer: $15
The GMK CAI has been installed and proven on the following makes and models:
Cougar/Contour I4 & V6
SVT Contour V6
mondeo I4 & V6
Cougar/Contour 3.0hybrid
Cougar/Contour 3.0
OBDII scan tool test results:
80 degree ambient temature. 8pm as tested at CougarFest 2k3
GMK CAI: 55mph 78degrees ......Idle 5mins: 82 degrees
Shortram: 55mph 120 degress....Idle 5mins: 162 degress
Here is an Image of the GMK CAI 2 installed. Enjoy!
http://www.fastcougar.com/forums/attachments/GMK2%2Ejpg