View Full Version : Injector color
Echoman
08-10-2005, 06:23 PM
Hey guys, I looked up injector colors and all I can find out for sure is that the 19# are green for the returnless. Anybody know what color the 24# injectors are for returnless or a way to tell for sure what pph (#) they are for sure?
mond12345
08-10-2005, 06:24 PM
I have #19 which are green and are return style..... :confused:
YOSLVR442
08-10-2005, 07:54 PM
24#'s are grey, they came out of a taurus/sable 2002
19#'s are green returnless, orange for return
FastCougar
08-10-2005, 08:03 PM
I have:
BLUE #24 from a 99 Taurus (Return Style)
ORANGE #19 from a 98 SVT Contour (Return Style)
DemonSVT
08-12-2005, 01:37 AM
Color alone is not a very good way to tell what size the injectors are.
If you know what they came out of and what color then you can normally figure out what size they are.
BLACKFXGT
08-17-2005, 01:28 AM
So grey injectors from a 2000 taurus would be 24lbs
Echoman
08-23-2005, 02:56 AM
Great thanks for the info guys!
AndyMan
06-19-2007, 01:25 PM
okay,
who can answer this question...
this injector in this picture is???? :confused:
(mind u it came of a 3L 2002 sable)
its says YL8E-C7B on it
http://i81.photobucket.com/albums/j233/Andyman4/DSCN0988.jpg
http://i81.photobucket.com/albums/j233/Andyman4/DSCN0985.jpg
would u consider this cream, grey, or white?????????????????????????
most importantly.... what is the poundage???
Blackcoog
06-19-2007, 02:48 PM
As I posted in your other post I had the cream and gray injectors from the 2001+ sables/Taurus flow tested.
Flow Test Results:
Cream:19lb (the ones you have in the picture above)
Gray:22lb
SVT Contour Orange:19lb
I was expecting the cream injectors to be 21 and the gray injectors to be 24 so it was a bit confusing. After running the orange injectors which we know are 19's it verified the tester was working correctly. Also the tester flow tested 6 injectors at once so we could verify it wasn't just a bad injector . All the injectors in each group were very close to the same flow rate.
StealthyWeasel
06-19-2007, 02:49 PM
those are probably 19#'s. I have never seen a 3L with 17#'s, but they do look like them.
Send them out and have them flow tested.
AndyMan
06-19-2007, 07:54 PM
whewwwwwwwww.......
alright,.. thanks for the info and clarity...
why would a 3L come with 17#s... as long as they were 19#ers that was my concern all along.... so we are good to go... :thumbsup:
This engine goes in this weekend :)
This engine goes in this weekend :)
One way or another, right? ;)