My Uninstall *pics*

[gyger]

Well as some of you know I have crappy luck. And when you have crappy luck
and your main hobbie is motors/vehicles....well there is alot of work involved.
July 4th the clutch in my truck blew out and stranded my wife and I in Akron.
Leaving us to pay for a flatbed to take it to Medina (parents). Upon arrival
the driver slammed the roof of my gorgeous truck into our basket ball hoop.
Now I have to get the clutch replaced and get the truck mobile so the truck driver
can fix the damage to the roof. Well I'm still out of a job so I have to do all the work.
Cause shops want $700-$800 and that's not happening. (when the clutch only costs 120.00)
Anyway Sunday I dropped the transfer case (cause my truck is 4x4) and called it a day
after taking a long time to clean it up. I still have to drop the tranny and the clutch housing
but I should have the whole project done and road ready SOON!.
Mean while Trinity racing still has my cylinder and head for my quad. :mad:
Sorry for the long post
here are some pics
P.S. the transfer case must weigh atleast 175-200+lbs it's going to be fun getting it about three feet in the air to reinstall it.
There is a pic also of me with my uncle's new 49 Lincoln Cosmopolitan 4door (rare) and it has suicide rear doors
,runs great. cool car
http://www.fastcougar.com/forums/attachments/transferr%2Ejpg
http://www.fastcougar.com/forums/attachments/quaddddd%2Ejpg
http://www.fastcougar.com/forums/attachments/cougaaggg%2EJPG
http://www.fastcougar.com/forums/attachments/transfer%2Ejpg
http://www.fastcougar.com/forums/attachments/quadddd%2EJPG
http://www.fastcougar.com/forums/attachments/49linccosmo%2EJPG

[Bexcat]

Hey the Blaster looks clean, and light:biggrin:
I did a clutch in one of my 4x4 BroncoII and yeah it's a pain the ass to lift the transfer case/trans up into it's home. My clutch went in the Ranger this Jan. and I had a shop do it $750, I wasn't doing it when it was 19 degrees out!
Any pix of the truck?

[gyger]

Yeah I just dropped the Tranny today I'll throw some pics of that up tomorrow
right now I'm gone crash with my woman. Almost done. We have to custom fabricate
a steel transfer case mount for the truck tomorrow it's gonna suck. But I'm almost
done. This has got to be the biggest pain in my ass yet. Everything on this truck weighs
over 135lbs. I got the clutch from Summit so now we just have to clean everything up.
Paint it and put it back on. Easier said then done. I'm pulling the clutch housing tomorrow
weather permiting. Keep in mind I'm doing all of this outside on the ground.

Anyway yeah I cleaned the quad up a bit and I'm just waiting for the top end from trinity.

http://www.fastcougar.com/forums/attachments/mytruckk%2Ejpg