Need "how to's" for matting whole car

[CougarEVO11]

I would like to mat the whole car by myself and wonder how I should do it. I believe applying the mat itself is not the difficult part and I should be able to do it without any problem. What I presume would be difficult is to remove all the stock parts to get to the place where I can apply the mat. Well I found how to's for removing the dash, center console, front/rear speakers and rear seats. Therefore I would need how to's for removing front seats, getting to the car roof and the inner firewall. As for the trunk, I believe I should be able to remove everything in there. The only part in the trunk which Iam not sure about is the huge plastic part at the very end of the car. All inputs are greatly appreciated. Many thanks.

[Monteknical]

The huge plastic thing in back of the trunk is easily removed. Just make sure not to break (I broke one of mine doing a fix) the 2 screws that sit right on the horizontal edge (Btw I have a 2000). Its a washer screw type of assembly. Get a flat head screw driver ( I used a butter knife) and wedge the SCREW out of the Washer, looks something like (O). The O being the screw, then the washer somes right off. As for the rest of the plastic its all clip ons that surround it, just gently pull on it.... hope that helps least a little bit....

[CougarEVO11]

Thanks for the input. Now what's left is the roof, front seats and firewall.

[antimatter]

http://www.cougardb.com/howto.php

i think there is one for the doors and the dash

I think the headliner is covered on this forum already. Do a little digging

[jaged]

if you take out the a,b,c pillars, visors, and the center light the headliner comes out easy. If you take your time you can see how all the parts come out. Just be careful not to pry too far back too fast

[CougarEVO11]

Thanks for the inputs, now there is just the front seats left.

[CougarEVO11]

Mangage to get my front seats out without any problems so that's done. Much easier than I thought. Did anyone apply deadening mats to the inner firewall? May I have pics of the install? Many thanks.