Whos doing what mods at CF. Please start a list here.

[Madcat]

This list is of who will be DOING the mods at CF. Not who will be having mods DONE to their car. Please keep on topic here so that we may find out whos doing what as people make arrangements.

I will be installing neons as of now Badasskat and Sunni or loyalty, I believe its on 2 cars one of the last 2 or 3 it doesnt matter, these are exterior neons and I will have my friend with me who does them as well. This will probably be a how to on 1 car as my friend follows and chimes in with another car, or the owner follows along. And an air/fuel gauge on tropiccougar01.
I am bringing a tool box, jack, maybe jack stands, cordless drill with 2 batteries, hacksaw(small one I think), and various other things. If you wish to have neons done and have contacted me PLEASE bring zip ties, assorted black ones please, just go out and buy the 5buck tube of zip ties at walmart and youll have more then enough. Thank you.
Remember PLEASE stay on topic here. Thank you.
:)

[01blkcat]

As of right now, I'm not a hundred percent sure who I may be able to help, but I will be bringing all of the tools required for most electrical work, cutting, etc. So any dash work, audio/video, neons, etc, I can be of assistance with....

[Loyalty]

I can't rememeber who all is definately having me do stuff.... But I know JennaJ wants me to open her headlights, and a few people have asked me to cut their MTX shifter down. I'll probably be helping with underbody installs as well.

I'll be bringin the tools to thread the shifter and knob, BUT if someone can please try to bring a hacksaw....I'm gonna see if I can borrow Pinhy's, saw, and his drill (w 2 batteries) if he'll be ok with that. I also should have some electrical items as well....

[GGRACER]

I definitely want to have my MTX shifter cut down and the amber taken out of my headlights. I would really like to have my stock springs cut to lower the car but I don't think it can be done with out a lift and some tools we won't have. Oh god please I need an oil change so bad but I can't find anywhere to go it with the kit. So who wants to help me. also please tell me what I need

[yakko69]

If possible, perhaps we can do Knibbs Fake Aussie headlight reflector mod for those that want it inluding mine. I'm also looking to crack my headlights and take the reflector out either way. I will be installing an 01-02 WW kit on that friday, as well as numerous LEDs inside all the buttons.

One other thing I wanted to do was to clean my UIM. Does anyone have the know-how to do this at the parking lot, and the time to do it?

I also will have a flowmaster dual exhaust that I am picking up from a member at CF, so that is also another option if it isnt too time consuming. Damn, I have my hands full!

[IDriveACooter]

I am installing a set of air strut bags!!!

I think on friday!

So I will have lots of air tools, Compressor, Generator, and boo koo other stuff if anyone needs to use anything!

[JennaJ]

One other thing I wanted to do was to clean my UIM

yeah me too - mine is pretty nasty custom_images/emoticons/shocked.gif it was really dirty last year when i got it - havent cleaned it since - prolly has a good 8,000 miles on it with no cleaning

[Iceotron]

I promised BeachCougar I'd help him install his system

Also if Loyalty has time I asked if he could cut down my shifter for me.

Oh, and my car has 40,xxx miles on it and I have yet to clean my UIM.......maybe I should do that.

[Loyalty]

This list is of who will be DOING the mods at CF. Not who will be having mods DONE to their car

Sorry guys, but we're just tryin to find out WHO'S doin the mods, and what is being brought....tryin to get the tools situtation organized I believe.......

[Loyalty]

Bumpin to see if anyone else is DOING mods :shrug:

[BatCougar]

I can do LEDs, change the color of all the switches and headight knob. Also I can change the color of the computer LCD screen as well as change Guages. Also will help with neons and bring all of my tools, wire, etc...

[Madcat]

Okay looks like I will be doing one large how to on the neons install, I will have Chris my friend with me to help and another friend to help slightly, Chris has helped me each time with mine and we did his car too. I will most likely take a center car and have several cars surround me while I do this how to for the neons, its simple shouldnt take more then 2hrs TOPS, and I hope less then that, just depends on peeps neon sets, and available tools, ok I spelled that wrong.... But I also just installed my Air Fuel gauge and it WORKS, however with running my venom400 my car runs very rich so yea its almost always in the rich, ok wait its always rich LOL but I know I have atleast 1 of these to install, I believe someone else asked but hasnt PMed me yet on it.
All I am asking before hand is that by Thursday morning you PM me with exacttly what you need done and whos cars and how many cars I need to do. I know most people already have but PLEASE do it again so I can make a list. Thank you!!!!
Also if anyone needs me to do any other mods please just ask, myself along with friends some NECO some not, are able to perform many mods and would like to help all night friday until I get drunk and go to the beach late at night!

[IDriveACooter]

I can do LEDs, change the color of all the switches and headight knob. Also I can change the color of the computer LCD screen as well as change Guages. Also will help with neons and bring all of my tools, wire, etc...

I want all mine redone in blue -- how much will you charge if i have you pick up all the LEDs and supplies?

-- Clint

[Excelcier]

I can do any electronics stuff... most of you already know that though! I'm bringing tools.

[Bexcat]

I'll help with anything, I like turnin wrenches.

Or I'll stand around and suggest and/or criticize the work being done without helping, with beverage in hand ofcoarse:biggrin:

[Nemesis]

Originally posted by: Bexcat
I'll help with anything, I like turnin wrenches.

Or I'll stand around and suggest and/or criticize the work being done without helping, with beverage in hand ofcoarse:biggrin:

Do you by anychance know how to install an Electrical Oil pressure gauge or ST200 Rear Strut Brace.........

[silverfrost99]

Originally posted by: DgnZCoug

Originally posted by: Bexcat
I'll help with anything, I like turnin wrenches.

Or I'll stand around and suggest and/or criticize the work being done without helping, with beverage in hand ofcoarse:biggrin:

Do you by anychance know how to install an Electrical Oil pressure gauge or ST200 Rear Strut Brace.........

I can install it for you if you bring the tools, just look at the how to, to see what all you need.

[Stewy]

Would one of you electronic wizards want to help with my blue led conversion. I have all the leds and resistors.

[Nemesis]

Originally posted by: silverfrost99

Originally posted by: DgnZCoug

Originally posted by: Bexcat
I'll help with anything, I like turnin wrenches.

Or I'll stand around and suggest and/or criticize the work being done without helping, with beverage in hand ofcoarse:biggrin:

Do you by anychance know how to install an Electrical Oil pressure gauge or ST200 Rear Strut Brace.........

I can install it for you if you bring the tools, just look at the how to, to see what all you need.

hey man ive got the how-to (http://atomicinternet.homeip.net/newmcneco/how-to_ST-200-Rear-Install.asp) of the jack and jack stands....maybe someone local will have some?

[BatCougar]

Me and GrandMasterKahn can put in the LED's. Not a problem I will have all the tools.

[Stewy]

Thanks