View Full Version : NightShades help.
Dante
07-01-2003, 02:35 PM
Alright.. Well.. I've decided to redo my tailights because the first time I did them, I left some runniness on them and they look like crap if you look really close at them. I put around 6 coats of NightShades and two clearcoats on each tailight. What is the process to remove the excess NightShades off the lights, and reapplying more coats. I have no idea what type of sand paper I need to sand them down so there nice and smooth. Any help would be apprecaited. Thanks.
I was thinking about doing this myself now that the weather is nicer because mine didnt come out exactly how i wanted them to. They have a few runs here and there and there are a some specs of dust on them
Jason J
07-01-2003, 06:31 PM
guys you can get a product(probly from the same company who make the tint) that is specifically designed to remove the tint.
i found when i did my first one it looked dusty the trick is(imo) not to let it dry like they say to let it go tacky then reapply another layer until you have the darkness you want hope this helps.
CATerina
07-01-2003, 08:04 PM
wet sand with 2000 grit and give it another coat.