PuckPuck
04-01-2005, 12:25 AM
Now a how to per say..... more of just a pictorial of how to get to the 2 pivot bolts on the alternator.
Lots of pics showing where to route the socket, ratchet, extensions, and u-joints. It only concentrates on the 2 pivot bolts. The bracket bolt is not shown, but it's so damn obvious.
All I can say about the bracket bolt is to remove it from the block. When you get the alt out, notice the direction of the bracket, remove it from the old alt, and install not full tight on the new alt in the same location. You'll thank me when you put it back in. Also don't forget to retighten both sides of that bracket.
How To Pictorial Link (http://www.puckpuck.com/showgallery.aspx?id=47&type=1&cols=4)
Lots of pics showing where to route the socket, ratchet, extensions, and u-joints. It only concentrates on the 2 pivot bolts. The bracket bolt is not shown, but it's so damn obvious.
All I can say about the bracket bolt is to remove it from the block. When you get the alt out, notice the direction of the bracket, remove it from the old alt, and install not full tight on the new alt in the same location. You'll thank me when you put it back in. Also don't forget to retighten both sides of that bracket.
How To Pictorial Link (http://www.puckpuck.com/showgallery.aspx?id=47&type=1&cols=4)