I just bought a used Pro Flow..HELP!!!

[MEOWWW]

Alright guys i just got a used pro flow 75mm maf from Chris at CTA Motorsports. He said it was calibrated for 19lb/hr injecotrs. My question is do i need to get it recalibrated!?!?!?! B/c i have the svt uim/lim/tb/intake/exhuast and the 19lb/hr injectors also.

Sooooo im thining i dont need to get it recalibrated b/c i also have the 19lb/hr injectors...

So what does everyone think?

[mindtrip1016]

Since it is used and he said that it is already calibrated for 19# and you are going to be using 19#, then I would use the pro flow as it is. Save the money that you would have spent on recalibration and put it towards your next mod.

[MEOWWW]

I hope ur right b/c im hoping it doesnt throw a CEL. I know its calibrated already for the same injecotrs i have. (19lb)

Im just worried that since it came off another coutour/cougar that it might act weird...

:shrug:

[Furious1]

Should be fine. Did you get the calibration sheet with it? (look below)

[MEOWWW]

Furious,

I havent recieved the ProFlow yet. According to ups im supposed to get it within 3 days.

The onnly thing thats got me bugged is that i think it was used on an svt contour with 19lb/hr injecotrs. So im HOPING that my cougar with 19lb/hr injecotrs should run it good. B/c i dont want to have to recalibrate it.

Furious...do u think it will need recalibrating since its from a contour svt?

[Furious1]

It shouldnt need to be re-calibrated, since the 19lb injectors we use, yourself included, are from the SVT Contour.

Just make sure the injector curve on the calibration sheet (top right) is "F57F for 19". If you dont get a cal sheet check the MAF, it should be either written or etched on top of the sensor (black plastic box sticking out of the MAF).

[MEOWWW]

THank you for the info Furious

:)

[hamill]

OR....you could PM Chris (cawong11) on the boards and ask him......he is a frequent on the Toronto boards....and the Chris you are referring to.