January Meet!?!?!

[MileHighCougar]

I was wondering if Trey has heard anything from YoDude about his exhaust? I would like to get a meet planned for Jan. to get his headers in and what ever else mods people have. I know I live a ways out but I would like to volunteer my house for the garage it has tons of room, its heated and in Jan I dont think we want to have to install headers outside!! Anyways let me know your thoughts and give me ideas for mods you guys have!!

[tdford]

Sorry I havent kept you guys up to speed........ but anyways, I got my exhaust on and I love it. Its not too loud, but after we install the headers it will get louder without a cat. But I was looking under my car when they installed my exhaust, and we are definetely going to have to go to a shop right after installation.

This is why: After my flex pipe the piping bends and bolts on to the rest of the exhaust. Well the headers end early, so its not going to be a strait shot extending one to the other. Yo-Dude sent me an extra piece of pipe, but its strait. Its going to have to have a bend in there to line it up with the rest of the exhaust. If any of you have any suggestions, let me know. But Im good to go, I got all the parts needed, that I know of.

Also, I recently got a aluminum fuel door, so if we want to put off the headers, we could do that.

And Jake, your going to bring me your grille right?

[MileHighCougar]

The grill is just sitting here waiting for you!! :) I might have the fuel door by then too!! If not it will the OMP FSTB either way fun stuff!! Like I said I think it would be nice to have it in a garage considering the temps could be pretty chilly, so let me know if there are any objections to having it at my place. So How is Jan 13th for everyone? It is a Sunday so hopefully we all can make it!! Give me some feedback!!

[CULASLUCAS]

just got my AEM and may have a fuel door too :banghead: we'll see...anyways, I'm excited :biggrin:

[tdford]

Well, if we do it on the 13th, I wont be able to make it. I go back to school on the 14th so the 13th will be moving day. Sorry.

[MileHighCougar]

Well scratch that idea then

[highgeer]

Are we looking to do this on a weekday or the weekend? It looks like all the dates you guys were proposing were for weekdays. Weekends are generally easier for me, but, I could do a weekday evening (not daytime, though) as long as Jake has plenty of light and heat in his garage!

Sounds like we've got plenty to do with headers, intakes, gas caps, etc. Just to throw mine into the frey, I still have my aftermarket speakers I'd like to install as well as my aluminum pedals.

[tdford]

I think weekends are going to work for most people. My headers will have to be done prolly on a Saturday, because of the issue going to a muffler shop. But we'll find a good saturday that will work down the road.

Your speakers, and gas doors and what not could be done on a sunday though. And we could have multiple projects going at once too. I dont want to feel like you guys plan around me, but I shouldnt have anything going on on the 20th. So if you guys want to do some things on the 13th thats ok. Just let me know whats up.

[MileHighCougar]

Here is the deal I work every Saturday until 8, so I wont be able to help with the headers but for the other stuff we can do it on a sun and do it here. I have plenty of light and will make sure there is heat. The 20th is a mon so that means the 13th is too so that is my bad!! 19th is sun and 18th in sat. Let me know what you guys think!!

[tdford]

Oh crap, yep your right. When I looked at my computers callender for January, I fogot to look at the year, it was on 02. So yeah, I cant on the 12th, but the 19th should work at your place Jake. We could do some fuel doors, strut bars, speakers..........so will that work for everyone or do we need to look for a different day?

[MileHighCougar]

Im down for the 19th if you guys want to do the fuel doors, intakes and Jeremys speakers and pedals and anything else. I guess I will have to miss the header install :( Anyways let me know

[tdford]

Sounds good to me Jake.

[MileHighCougar]

K thats one confirmation let me know who else!!

[TurboGrim]

I'll be in florida from the 18th to the 31st so it's a no go for me :(

[MileHighCougar]

That sucks will have to catch you at the Feb meet

[Bicycle019]

Anyone mind if a few Contour guys show up? :)

[CbOy2000]

I don't mind and I don't think anyone else would so come and chill. I think it would be better to have more people there anyways, Cougar or Countour.

[MileHighCougar]

Alex you and Chad are always welcome out here!! David are you gonna be coming!! I think that Sam will be cooking some grub for us!! For those of you that dont know he is in school to be a chef!!

[tdford]

Jake you do have a dremel right? Because we need one for the fuel doors. Also, I'll have a surprise for ya Jake when I get there(I got very lucky).

David, and whoever whants to get some euro tail lights to be put on at the meet, please let me know ASAP for I need time for them to be shipped here.

What time you want us to come Jake?

[MileHighCougar]

I dont have a dremel!! :( But I can probally borrow one!! What surprize??? 11 is the magic time!! Who is Chris?? Anyways see you there!!

[tdford]

I dont know who Chris is...........:banhim:I ment to say David.......Sorry.

YES, we have to have a dremel for the fuel doors. There is a How To write up on TeamNeco's site. You might want to just take a glance at it and make sure we have all the tools necessary.

And, its not really a surprise, I have just been working on something for a little while that I want to show you. Nothing big.

[MileHighCougar]

Sweet I will see you at 11!! You are welcome to come earlier!! Lucas and I will be attempting to make angel eyes at the meet as well so we will see!! :)

[CbOy2000]

So the 19th at 11am?? If so thats fine for me. Plus i got a dremel that we can use im just not sure what bits i got for it since i lost a few.

[MileHighCougar]

Very nice!! I have the torx and any air tools we need!! All I needed was the dremel, way to come through David!!

[tdford]

Thats good, because we have to grind away metal and plastic for the fuel door.

[Q4kntmare]

count me in on the angel eyes as well...if you buy the supplies then i'll pay ya back for them...

Also, i will try and make some awesome potato salad before i come over, maybe some other stuff, dunno yet.

[Q4kntmare]

btw my dad has a dremel i can take. Just cant break it, or he will break me

[MileHighCougar]

Yeah Sam bring yours too and you will have to PM Lucus cause he is getting the supplies

[CULASLUCAS]

I got it...so I'm buying angel supplies for 3, paid tdford for the euro lights, and I think that's it. I think I can get a dremel too...anyone know where to get some cheap fuel doors? 'cause I'd like one and my cheap deal fell through. Also if someone has a digital camera that'd be sweet to take B4 and after pics.

[MileHighCougar]

I have a digital camera so dont sweat it!!

[MileHighCougar]

ok Lucas and I both bought fuel doors tonight so we will have them too!! Crispy bought one too but she wont be at the meet cause she lives like 17 hours away!! :)

[Crispy]

Originally posted by: MileHighCougar
ok Lucas and I both bought fuel doors tonight so we will have them too!! Crispy bought one too but she wont be at the meet cause she lives like 17 hours away!! :)
:cry: ... don't worry though, my install will be easier cuz I am just going from the plastic Eclipse door to the Aluminum one.. BUT, maybe I can I'll ring Jake at the meet and say "Hi" to all you coolies so it's SORTA like I was there with you all .. :)

[MileHighCougar]

Sounds good to me Crispy!! By the way Trey I think I figured out your secret!! ;)

[tdford]

Yeah, well its not really a secret. I have just been wanting something for a while and got lucky, thats all. But yeah, I left it so someone could figure it out.

[CULASLUCAS]

Originally posted by: MileHighCougar
ok Lucas and I both bought fuel doors tonight so we will have them too!! Crispy bought one too but she wont be at the meet cause she lives like 17 hours away!! :)


Um...you bought fuel doors...as in plural...as in one for me also? I hope not 'cause I just got one too...yikes...if you did I'm sure someone won't mind dishing out 70 some bucks or whatever you paid for it

[CULASLUCAS]

angel eyes for 4 now...this is gonna be quite the experiment

[MileHighCougar]

No I only bought one!! I made it plural on accident!!

[FLuiDSVT]

What time are you guys meeting up at Jake? Till when? There is a big HAI (HighAltitudeImports) luncheon I would like to go crash at 12....then im down...

[MileHighCougar]

We are starting at 11 and I would guess with lunch and all we have a good 4 or 5 hours of stuff to do so we will be here for a while!! Tell Alex he is welcome to come too!!!

[highgeer]

Sorry for the delayed response, but I plan to be there - I've been on vacation for nearly a month now. Jake, let me know if you need me to bring my (small) space heater.

[MileHighCougar]

Yeah bring the heater for sure!! The warmer the better!! We can always cool it off! :)