View Full Version : factory door speakers removal
Zalec
12-19-2002, 02:09 AM
yea there a POS and im gonna change them. problem is i tried popping the grille off with no success. so my question is this, how to get the factory's out, and second what size can i put in there. im running with a aftermarket deck, dont know the exact model off hand but its power is 50x4. thanks for you help. :)
Loyalty
12-19-2002, 02:16 AM
5x7's, and 6x8's.....I think a 6.5 with an adapter plate......as far as getting to them.....do a SEARCH on it...sorry kinda busy to look right now.......
joemamaTypeR
12-19-2002, 03:13 AM
Speakers are 5x7.
You'll need to take the door panel off to get at the speaker. It's fairly easy, you just need a screwdriver and an allen wrench (I forget what size). Unscrew everything and the panel will come off easy.
CatMan
12-19-2002, 03:26 AM
There's also a how to on teamneco.com. And you need a torx bit, not an allen wrench.
EDIT: You could use an allen wrench if that's all you had, but you run the risk of stripping the screw. So it's much better to use the right tool if you have it.
Zalec
12-19-2002, 05:39 PM
thanks guys.