speedy130
06-02-2002, 08:17 PM
i looked but nothing came up i have a older pioneer multi disk cd changer cdx-fm35 if that means anything i have the stock head unit and want to put in this i have that sound control (avc) how would i go about hooking this all up i have 3 wires for power always on igntion powe and ground and help would be great
CatMan
06-02-2002, 09:44 PM
You should have more wires than that. Those three wires are just for getting power to the changer and getting it grounded. You still need a wire that'll connect it to the radio up front. You should also have a little metal box with an antenna cable coming out and a hole for another antenna cable to plug into it. And finally, you should have a wired remote that you can use to control the changer with. The three wires you described though are your power (most likely red), constant (most likely yellow), and ground (most likely black), which should be connected to another one of the same wires. In other words, your constant wire should be connected to something that always has power, the power should be connected to something that only has power when the car is turned on or set to accessory, and the ground can just be screwed into a metal part of the body.
speedy130
06-03-2002, 01:20 AM
ya i got all that stuff i some what know what im doing i do heating and air for a living so im good at this stuff just dont want to mess up the car and all