View Full Version : tools required to replace springs? anyone
Jorgen
05-22-2002, 07:03 PM
does anyone going to tom's this coming sunday have the tools to install roush springs and would like to help me do a set of those that day? i assume wiht someone that knows what they ar edoign we could get it done ina few short hours... anyone have the tools like i believe ball joint seperator and spring compressor is about all you need that is anything special
RiverRojo
05-22-2002, 07:28 PM
Ball joint seperator and spring compressor can be rented from your local autozone. All you then need is a pry bar, bfh, and assorted sockets and extensions for the rear. Pretty easy job. Air tools make it so much easier though.
PuckPuck
05-23-2002, 03:59 PM
18mm deep socket
15mm socket
13mm socket
10mm socket
12" worth of socket extensions
13mm wrench
15mm wrench (2001+ only)
17mm wrench (1999-2000 only)
18mm wrench
Alan Key (forget what size, just bring a metric set and you'll have the right size)
Jack
Jackstands
BFH
piece of a 2X4 - about 12" long or so
Spring Compressor (rent from autozone)
oh and whatever tools you need to remove your wheels :)