bensenvill
03-24-2004, 05:46 AM
seems simple right? Its only 2 screws and I know everything else about the removal. But I cant get those fricking screws out. What am I doing wrong. I took off both the upper and lower covers off the steering column in hopes of getting more space to access the screws. The only angle I can access those 2 screw are around the guage area and its tight as hell to work.
First off, the screw hole is too small to use any device that connects to a bit and using a dedicated screw driver with that torx size doesnt give me enough leverage to turn the screws.
help!
~Terry
First off, the screw hole is too small to use any device that connects to a bit and using a dedicated screw driver with that torx size doesnt give me enough leverage to turn the screws.
help!
~Terry