grill help

[jargolf24]

if i wanted to replace my current grill with the steal mesh what is the best way to go about this any help would be greatly appreciated

[h20b0ttle]

Try the Custom Grill Insert for Factory Grill HowTo (http://www.fastcougar.com/forums/messageview.cfm?catid=14&threadid=24384).

/hunter

[jargolf24]

thanks for that but i have a 1999 so i also have the bottom grill to deal with, are there pre done instructions do to mesh somewhere for this part as well??

[h20b0ttle]

Best I could find: Bottom Grilles (http://www.fastcougar.com/forums/messageview.cfm?catid=14&threadid=11362).

Hope that helps.

/hunter

[jargolf24]

i will look at my car later cause i have no idea what they are talkin about honeslty but thanks for trying

[cwtIII]

When I changed out my grills to aluminum mesh, I actually removed the front bumper cover to do it. This made the install much easier. All I did was take out the stock grills, lay them out on the sheet of mesh, trace them out (about an inch or so larger than the stock grills), and cut the mesh. Then I cut some slits in the mesh to fit over the little tabs that held the stock grills on, fitted the mesh over them, and bent the excess material over the edges. It was fairly simple, and turned out looking really professional!
Does that help?
Charles

[Gary]

I don't know if it helped him, but it will help me!!!

thanks

[jargolf24]

is it easy to remove the front bumper cover, how did you get it off?

[cwtIII]

PMed you!

[jargolf24]

thanks for al your help, i think i can do it now!!