Carbon Fiber Interior Work **Sneak Peak**

[StreetConcepts]

Here are some pics from my interior i'mworking on. The pieces are not done yet I need to wetsand them as well as respray the black trim edges and painted sections of the bezel and headlight panel. My masking tape I had was leaving residue on the surface and caused imperfections so I decided to spray 3 coats of the clear and then I will wetsand it smooth with 1500 grit, respray the black, 2 more coats of clear and then wetsand with 3000 and buff with polishing compound. My dash bezel now looks as if it were made to accept the single DIN radio and has a nice pocket below with grooves to hold 2 cd jewel cases. My radio will never pop out again :)

I will also be doing the upper dash bubble, air bag cover, glove box, arm rest, and driver side crash pad. Every other piece of plastic in my car is getting painted the same gunmetal color as my wheels.

http://www.carbon-concepts.com/newreleases/image/cougar_dashbezel.jpg

More Pics HERE (http://www.carbon-concepts.com/products.html)

I also include pics of the new WRX grille inserts I am doing for another company.

http://www.carbon-concepts.com/newreleases/image/wrx_grilleinsert.jpg

what do you guys think?

[cwtIII]

AMAZING WORK sir! Seems like you have really perfected the carbon fiber! I have never seen such quality before! BTW...I still want you to carbon fiber my lower mirror housings and triangular fender inserts!
Charles

[NorCalCoug]

You know, lower mirror housings and the fender inserts for the mirror housings are the only thing that I would ever buy to put as carbon fiber on my car.. simply because I hate the look of the exterior plastic, and the carbon fiber would look better. Other than that, the quality of the dash is superb looking. :) Really quality looking. Almost like liquid poured over carbon fiber. :biggrin:

[cougarXR7]

my god I just messed myself... damn... that was a lot!

[Red2KCougar]

that is SWEET!!!

[Y2Kat]

:cry:
Why didn't this get posted before I bought my dash kit
:cry:

[TwistedXzibits]

How much would you charge for something like this on my Cougar? I think it looks great, but wouldn't wanna pay a lot more than a normal dash kit

[CatMan]

I'm sure it would cost a LOT more than a regular dash kit. Especially if you wanted everything covered that a dash kit covers. Craig that looks like it took you forever to do. I'm sure it was worth it though. Very nice work man!

[Sunni]

WOW! I will have to agree with everyone else......it looks AMAZING! Great work!

[StreetConcepts]

The radio bezel alone had 50 hrs invested. there are actually 3 pieces of carbon there. one piece is seamless and covers the indent on the left and side near the steering wheel. the other section is seamed right under the lip for the heater controls. I also had the time invested to mold the dash kit in place so that was not a quick job ;)

[Synergii1]

Okie after I invest money in the turbo, can U make a dash for me too? Heheheh

Can I see the headlight pics too? heehee

[StreetConcepts]

I will be clearing your headlights after I get masking tape from the body shop. I masked your lights when I did this stuff and when it left the residue I just let the black border dry completely then pulled the tape off and cleaned it all with acetone. I'm gonna have them cleared and ready for the paint work for monday when I pick up doug's covers with the red pearl on them.

[CougarGT]

OMG
I sooooooooo need a Carbon Hood, mirrors, tailight covers, and gas lid!
SOmeday Craig....SOme Day!

[Cougar0102]

Lookin' good, dude. Just wondering tho - i dont see how that grill instert fits on the WRX? :shrug:

Bryan

[Gunmetal]

Lookin' good, dude. Just wondering tho - i dont see how that grill instert fits on the WRX?
Looks like they replace the little pieces between the opening of the grill and the headlights

[StreetConcepts]

They are just to the insides of the bubble shaped headlights on the WRX

[Cougar0102]

oohhh, i know what ur talking about. thanks ;)

Bryan

[TwistedXzibits]

This guy makes some wicked ****! Great work man

[StreetConcepts]

Today I committed to a project for the 2002 International Auto Salon. More details to follow :)

[PSUCougar]

That looks awesome Craig.

[cwtIII]

Craig, if you want to get started on my lower mirror housings, I will sent the money NOW! I need to stop by my dealer and find out how much the triangular fender inserts will cost me, and I will send a pair out to you! I don't know how long all the work will take you , but since you are driving down to my general area I would LOVE it if you could deliver the product in person! I have been impressed with your work on the Cougar for some time now, and would appreciate the opportunity to share ideas with you.
Charles

[ATLCOUGAR]

Hell Yea craig that DASH is frickin sweet... Good job


EDIT

Congrats on the project, I bet that will be some nice stuff.....

[CougarDoug]

DUDE - AWESOME WORK!!!!!!

Very nicely done!!! (I like the part about your radio not sliding out. Mine does all the time - so I had to find a way to rig it so it dosent. I have just a normal head unit kit.)

I cant wait to see my covers ;)

hmmmmmm - what should I get next??? :biggrin:

[Teflonworm]

Craig.......just sick mang :biggrin:

I can only imagine what your car is going to turn out like when finally reassembled......should be amazing as usual :biggrin: