View Full Version : removing starter!??
IdealProductz
07-04-2008, 07:27 PM
Im removing my tranny. Finally have some time to work on it and I can not remove the tranny. The bolts are impossible to get to? Is there a trick to it or somehting?
michcougar
07-04-2008, 07:30 PM
What are you talking about? your tranny or your starter?
wadespencer99
07-04-2008, 07:44 PM
There are three 13mm bolts. The front one you have to use a wrench to get to, and you won't be able to turn it much. The rear one you can reach with extensions and a socket.
The third one is a very short one you can get a socket on...it just holds a bracket.
IdealProductz
07-08-2008, 02:28 PM
Hey thanks wade, i got the 3 bolts out but it seems like its still stuck in there, does it pull out or lift out?
wadespencer99
07-08-2008, 02:29 PM
It lifts up, then you can wiggle it out.
Blackcoog
07-10-2008, 08:28 AM
The studs on the front get a little corroded some times and you need to ease it out with a BFH.
It lifts up, then you can wiggle it out.
and when Wade says wiggle, he means pull the **** out of it without damaging anything. :rofl:
seriously tho, its wiggle time... lots of wiggle.