01 02 Mount kit for a 99

[Juelz]

Would a 01 02 mount kit fit in my 99 ? I mean they look pretty much the same :confused:

[bgred619]

not 100% sure but i would say no the 01/02 are not rounded so much in the coners as the 99/00 are, or visa versa cant remember

[iceberg65]

no they do not fit. the opening is bigger in the 01/02 cougars then the 99/00's
most audio places have the proper mounting kit, in my case they had it in the back where their install bay is rather then on the shelf because its not a commonly used piece.

[kustomcougar]

no they do not fit. the opening is bigger in the 01/02 cougars then the 99/00's
most audio places have the proper mounting kit, in my case they had it in the back where their install bay is rather then on the shelf because its not a commonly used piece.

thats not right, the only thing that is different is the the 01-02 have square edges as the 99-00 have rounded edges

[ironworker]

The 01-02 Have A Double Din Opening And The 99-00 Have A Din An A Half...it Will Not Work 01-02 Kit Is Bigger

[LostRacer]

thats not right, the only thing that is different is the the 01-02 have square edges as the 99-00 have rounded edges
Incorrect. Iceberg is exactly right. The opening on the bezel for the 99/00 has rounded edges making it a smaller opening (din and a half) You can purchase an 01/02 bezel to give you the squared edges avtually opeing up the hole to a double din face.

The 01-02 Have A Double Din Opening And The 99-00 Have A Din An A Half...it Will Not Work 01-02 Kit Is Bigger

Perfect.

[work_in_progress]

So, just not to open a new thread:

Where/how can I search for a different mount kit for my reciever? The crappy plastic thing I got from crutchfield pops out every so often and also would be SUPER east to jack from my car. I've looked here in town for something that screws in/bolts down somehow and they've only got that type of mount. Or does a different one even exsist for us? I've been told nope.

[MOMO]

So, just not to open a new thread:

Where/how can I search for a different mount kit for my reciever? The crappy plastic thing I got from crutchfield pops out every so often and also would be SUPER east to jack from my car. I've looked here in town for something that screws in/bolts down somehow and they've only got that type of mount. Or does a different one even exsist for us? I've been told nope.

i think i have tried kit from Metra and Scosch and they both suck and pops out like you said. i ended up anchoring the kit onto the bezel while i had it out.

Now, i just got it molded it on.

[B3NN3TT]

I have an 01-02 bezel on my dash, and I installed my 2000 stereo into it... :shrug:

[work_in_progress]

i think i have tried kit from Metra and Scosch and they both suck and pops out like you said. i ended up anchoring the kit onto the bezel while i had it out.

Now, i just got it molded it on.

Alrighty. Yeah it's just super annoying to be pressing that thing back in every time I accelerate hard. Also not to comfortable knowing the whole thing could be stolen in literally a matter of seconds. Prolly will end up drilling some holes and bolting it in. /sigh

[Drewmanfu0]

The american international kit is the shiznat ka-bam. it mounts very solidly.

[work_in_progress]

Sweets, thanks for the info. Is this what you're talking of:

Mount Kit (http://www.installer.com/item/display_item.php?it=99-5200)

[Drewmanfu0]

This is the kit that everyone should be using. FMK565*::*Installation*Kits*::*Car*Audio... (http://www.al-eds.com/product.php?productid=17386&gclid=CPX3hOqH0JQCFQMIswodG3WfkA)