Turbo Zetec 'tour
05-19-2008, 12:37 PM
I have for sale the turbo kit that i built for my zetec. im looking for $2500. the parts all have less than 10K miles on them and the turbo has less than 3K miles on it.
list of parts in the turbo kit.
Garrett T3 Super 60 turbo
Focus manifold
adpater pipe with wastegate take-off
Tial 38mm wastegate
2.5" downpipe with 3 O2 bungs
4" blue Spectre filter
90mm Lightning MAF
2.5" aluminum intercooler plumbing
bar and plate intercooler (cant think of the brand name off hand but i will try to look it up for you)
HKS Super Sequential BOV (SSQV)
silicone couplers and reducers where needed
a mix of t-bolt and constant torque clamps
oil feed and drain lines (including all adapters)
oil pan
coil pack bracket (to allow for the oil feed line from the head)
Sunpro boost gauge
AEM wideband O2
Apexi turbo timer
PCV system lines and oil separators (you will need to find a way to mount the separators as the studs i used dont exist on 98+ contours/cougars)
Ford Racing 42# injectors
Misc bolts and gaskets
the only decent pictures i really have of it are when i was building it
http://i84.photobucket.com/albums/k17/Dslax/SSPX0092.jpg
http://i84.photobucket.com/albums/k17/Dslax/SSPX0094.jpg
http://i84.photobucket.com/albums/k17/Dslax/101_0413.jpg
http://i84.photobucket.com/albums/k17/Dslax/101_0415.jpg
http://i84.photobucket.com/albums/k17/Dslax/Picture012.jpg
http://i84.photobucket.com/albums/k17/Dslax/Picture003-3.jpg
http://i84.photobucket.com/albums/k17/Dslax/SSPX0195.jpg
http://i84.photobucket.com/albums/k17/Dslax/SSPX0194.jpg
http://i84.photobucket.com/albums/k17/Dslax/SSPX0193.jpg
http://i84.photobucket.com/albums/k17/Dslax/SSPX0192.jpg
This kit will require you to remove your A/C as the downpipe i built does not clear the compressor. feel free to ask any questions you may have, either here or via PM.
list of parts in the turbo kit.
Garrett T3 Super 60 turbo
Focus manifold
adpater pipe with wastegate take-off
Tial 38mm wastegate
2.5" downpipe with 3 O2 bungs
4" blue Spectre filter
90mm Lightning MAF
2.5" aluminum intercooler plumbing
bar and plate intercooler (cant think of the brand name off hand but i will try to look it up for you)
HKS Super Sequential BOV (SSQV)
silicone couplers and reducers where needed
a mix of t-bolt and constant torque clamps
oil feed and drain lines (including all adapters)
oil pan
coil pack bracket (to allow for the oil feed line from the head)
Sunpro boost gauge
AEM wideband O2
Apexi turbo timer
PCV system lines and oil separators (you will need to find a way to mount the separators as the studs i used dont exist on 98+ contours/cougars)
Ford Racing 42# injectors
Misc bolts and gaskets
the only decent pictures i really have of it are when i was building it
http://i84.photobucket.com/albums/k17/Dslax/SSPX0092.jpg
http://i84.photobucket.com/albums/k17/Dslax/SSPX0094.jpg
http://i84.photobucket.com/albums/k17/Dslax/101_0413.jpg
http://i84.photobucket.com/albums/k17/Dslax/101_0415.jpg
http://i84.photobucket.com/albums/k17/Dslax/Picture012.jpg
http://i84.photobucket.com/albums/k17/Dslax/Picture003-3.jpg
http://i84.photobucket.com/albums/k17/Dslax/SSPX0195.jpg
http://i84.photobucket.com/albums/k17/Dslax/SSPX0194.jpg
http://i84.photobucket.com/albums/k17/Dslax/SSPX0193.jpg
http://i84.photobucket.com/albums/k17/Dslax/SSPX0192.jpg
This kit will require you to remove your A/C as the downpipe i built does not clear the compressor. feel free to ask any questions you may have, either here or via PM.