View Full Version : GB: Stangkiller LCA (interest check)
I know there is a thread out there for this but this one is to actually put down some names so that i can have a definate numbers when i talk to Mike.
Add your name to the list and pass it down.
thanks guys!
Rich
1. MOMO (Cougar, 2 bolts)
1. MOMO (NECO/CEG)
2. ryanblacksvt 2 and possibly 4 (CEG)
3. xtascox 4 bolt (CEG)
4. Black 98 CSVT 4 Bolt (CEG)
5. Redlineracer12 2 Bolt (CEG)
6. CSVT#49 4 bolt (CEG)
7. Schattastic SVT Maybe 4 bolt (CEG)
8. Beans 4 bolt if price is right (CEG)
9 Necronommicon 4 bolt (CEG)
10. skywalker Interested (CEG)
11. Matty K 4bolt (CEG)
12. S.BOOGIE2468 (NECO)
13. Kpeeks 2 bolt (NECO)
14. cvsmightymouse24 (NECO)
boarder4life
05-07-2008, 12:56 PM
any chance on a price quotation?
B3NN3TT
05-07-2008, 01:16 PM
Are these front or rear LCA's?
bensenvill
05-07-2008, 01:28 PM
fronts
any chance on a price quotation?
price should be around 350, but as we get a concrete numbers, that can be negotiated.
More numbers we have, better our position will be.
Bensenvill is the expert so he will answer all your questions. :)
S.BOOGIE2468
05-07-2008, 03:32 PM
Put me in for the 4 bolt LCA's.
kpeeks
05-07-2008, 10:02 PM
I'd like some 2 bolt arms.
cvsmightymouse24
05-08-2008, 01:15 AM
put me down for a set....i'll pm you and let you know either 2 or 4 bolt
14 and growing!!!!
These will drastically reduce wheel hop!
Danef150
05-08-2008, 09:10 AM
I dont think he ever fabbed up any 4 bolt LCA's, :( that might smack our numbers down quite a bit. Also he hasnt responded to my email yet. But its only been a few days so i will give him some more time befor i call him again.
B3NN3TT
05-08-2008, 09:40 AM
Man, if they had urethane bushings, instead of heim joints, I would be all over this. I put over 15,000 miles a year on this car, and I'm just pretty certain these would shake the teeth out of my head on a daily driver.
S.BOOGIE2468
05-08-2008, 11:40 AM
I'm not sure but I think he did. I was part of the last group buy he did for them about a year ago that did not go through, because the price was to high for some members.
bensenvill
05-08-2008, 12:40 PM
no he never made the 4bolt, he hinted that he might possibly in the future, I probably should have never even mentioned it at all.
Gorman
05-08-2008, 02:15 PM
maybe if he's too busy...someone can make them using his jig under license..eh?...oh and get the four bolt jig too :biggrin: ..G.
Danef150
05-08-2008, 03:19 PM
B3NN3TT the ride is a bit more rough...I drive my car daily...i dont find it too rough and we have some of the worst streets around...edit i dont find it too rough for the benefits they provide...I dont think its overall that bad...Since most of the shock is obsorbed by the springs and struts.
bensenvill
05-08-2008, 04:07 PM
Bensenvill is the expert so he will answer all your questions. :)
:rofl::rofl::rofl::rofl::rofl::rofl:
no I just like stopping in here to rub in the awsomeness of my suspension
:wiggle:
1. Sharkie17 (NECO/CEG)
2. ryanblacksvt 2 and possibly 4 (CEG)
3. xtascox (CEG) ....................................4bolts
4. Black 98 CSVT (CEG) ..........................4 bolts
5. Redlineracer12 (CEG) .........................2 bolts
6. CSVT#49 (CEG) .................................4 bolts
7. Schattastic SVT Maybe 4 bolt (CEG)
8. Beans 4 bolt if price is right (CEG)
9 Necronommicon (CEG) ........................4 bolts
10. skywalker Interested (CEG)
11. Matty K (CEG) .................................4 bolts
12. S.BOOGIE2468 (NECO)
13. Kpeeks (NECO) ................................2 bolts
14. cvsmightymouse24 (NECO)
15. Sportracer (CEG)
16. Project SVT (CEG) ..............................2 bolts
17. mattsBLK99cSVT (CEG)
18. Oberthecat (CEG)...............................2 bolts
19. S2Knott (CEG)
1. MOMO (NECO/CEG) .........................2 bolts
2. ryanblacksvt 2 and possibly 4 (CEG)
3. xtascox (CEG) ....................................4bolts
4. Black 98 CSVT (CEG) ..........................4 bolts
5. Redlineracer12 (CEG) .........................2 bolts
6. CSVT#49 (CEG) .................................4 bolts
7. Schattastic SVT Maybe 4 bolt (CEG)
8. Beans 4 bolt if price is right (CEG)
9 Necronommicon (CEG) ........................4 bolts
10. skywalker Interested (CEG)
11. Matty K (CEG) .................................4 bolts
12. S.BOOGIE2468 (NECO)
13. Kpeeks (NECO) ................................2 bolts
14. cvsmightymouse24 (NECO)
15. Sportracer (CEG)
16. Project SVT (CEG) ..............................2 bolts
17. mattsBLK99cSVT (CEG)
18. Oberthecat (CEG)...............................2 bolts
19. S2Knott (CEG)
20. slicktsax (CEG)...................................2 bolts
21. Cougarguy (NECO) .............................4 bolts
22. Black 98 CSVT
23 98SVTC (CEG)....................................4 bolts
Ok guys, just got word that Mike is going to do this!
Since there are so much interests in 4 bolts, he probably will do 4 bolts as well.
Mike will come and visit the board probably today and let us know the pricing and such.
Thanks a lot guys for making this happen!!!!
rich
Danef150
05-10-2008, 01:11 PM
Hold up yikes momo. He's coming to check interest guys.. If your truely interested i hope you have your wallets or economic stimulous checks where your mouths are :) I'll say it again My lower control arms are great, Their a little noisy, a little harsh, but a ton better than the junky stockers they replaced. But yes interest willing he may do this. I just fear the 4 bolters might cut our numbers considerably. However he might be able to fix that problem eaisly we will see.
you have to stay positive! :tongue:
docfeelgood111
05-15-2008, 02:42 AM
I'd be in for a set of the 2 bolts.
Redlineracer12
05-15-2008, 11:39 AM
Any more recent updates?
havent heard anything back from Dane...
will keep you guys posted.
rich
99cougarsupreme
05-18-2008, 08:27 AM
I'd be in for a set i'll tell you later 2 bolts or 4 when it starts!!
Will
cvsmightymouse24
05-18-2008, 07:43 PM
any updates so far?
Topik
05-18-2008, 09:32 PM
havent heard anything back from Dane...
will keep you guys posted.
rich
..
Danef150
05-18-2008, 09:39 PM
Yes i havent heard anything from Mike either...however in the email he sent me he said he would get online here sometime in the near future to check the intereste out himself. I dont know if he has or what but he also hasnt responded to my last email...it takes him a while to get to his email i guess. He seemed buisy last time i talked to him. if i hear anything i will be sure to keep everyone posted.
atlas
05-22-2008, 10:19 AM
I'd be interested in a set. Don't know if I need 2 or 4 bolt. I have a 2001 2.5L... ?
fordrule
05-25-2008, 11:48 AM
id be interested depending on the price and my re-enlistment
Nezerconezer
05-25-2008, 11:47 PM
Interested.
azbobbybooshay10
06-13-2008, 08:26 PM
I went to get an alignment done today and looks like my LCA bushings are shot and need replaced. I might as well go ahead and go for this then if I have to replace them anyway. I'm in as long as the payment isn't needed until after Fest.
blu_fuz
06-17-2008, 10:41 AM
I would be in for a set of 4 bolt contour arms. Do they come with ball joints?
docfeelgood111
06-17-2008, 12:45 PM
anything going on with this?
bensenvill
06-17-2008, 01:10 PM
FYI to everyone interested, I asked Stangkiller to start the group buy thread himself, and that way he can update the first post with deposit, payment, and production information.
I think it would be better and more organized if it were run that way.
I agree with wade and will be locking this thread as well until stangkiller wants to come around himself.